[NY] WTB - AC compressor brace for TPI V belt set up
#1
WTB - AC compressor brace for TPI V belt set up
I am looking for the brace for the AC compressor thet goes from the top AC bracket to the exhaust manifold stud for a TPI car with the v belts. I am pretty sure 1985 TPI cars had it - possibly 86 and 87. Let me know if you have one to sell.
Last edited by 82tarecaro; 03-03-2013 at 01:01 PM.
#3
Supreme Member
iTrader: (34)
Join Date: Jul 2002
Location: Stamford, New York
Posts: 1,983
Likes: 0
Received 6 Likes
on
3 Posts
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: WTB - AC compressor brace for TPI V belt set up
can you post pics? i have a pile of v-belt tpi complete setup, just don't know what bracket went where.
#5
Re: WTB - AC compressor brace for TPI V belt set up
I had a tough time trying to find a pic of it. I found it in someone's ad on here. Not the best pic, but you can see it coming off the top AC bracket, going down to the exhaust manifold. It looks like a piece of round stock bent on both ends with mounting holes on either end. It also might have a bend in the middle but I am not positive.
#7
Member
iTrader: (8)
Join Date: Dec 2001
Location: Simi Valley, CA USA
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87' Pont GTA
Engine: 5.7L
Transmission: 700R4
Re: WTB - AC compressor brace for TPI V belt set up
According to your picture I believe this is the one that you are requesting. The price runs $10.00 plus shipping and handling.
Thank you,
Thomas R. ***
(805) 522-2539
www.houseofcamaro.com
Thank you,
Thomas R. ***
(805) 522-2539
www.houseofcamaro.com
Trending Topics
#12
Supreme Member
iTrader: (167)
Re: WTB - AC compressor brace for TPI V belt set up
I don;t have a 85-87 TPI to compare to at the moment,..... but I think this is the right one; It's about 14 inches long. Looks like what Thomas posted above:
Pretty sure it was blasted & re-painted in the group of parts from a previous re-build, but I never re-install AC ! My most recent re-builds were 305 V-Belt.....
$16 shipped.
Pretty sure it was blasted & re-painted in the group of parts from a previous re-build, but I never re-install AC ! My most recent re-builds were 305 V-Belt.....
$16 shipped.
#15
Re: WTB - AC compressor brace for TPI V belt set up
You are right Thomas - I did not realize it - but I could not figure it out from the picture that the curved part went to the exhaust side. John is a little closer to me in the country and I think I can get it from him quicker. I wish I could have figured it out from the pic you posted but I am not using this in a TPI application and I did not have one on hand to reference.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
Navy8125
Engine/Drivetrain/Suspension Parts for Sale
10
08-22-2015 07:13 PM
Mister_Johnny99
Interior Parts Wanted
0
08-14-2015 12:59 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM