[CA] Partting out My 83 Camaro Z28
Thread Starter
Member
iTrader: (12)
Joined: Sep 2009
Posts: 452
Likes: 0
From: Norwalk, CA
Car: 1983 Z-28
Engine: 5.7 L
Transmission: T-5
Partting out My 83 Camaro Z28
The car has a 350 rebuilt was bored .030 over and it has forged pistons, mild cam from comp cams 12-210-2 and 416 heads. $750OBO
The engine It has zero driving miles.
Pro 5 shifter - $120 shipped
Two master slave cylinder $15 plus shipping each
Power master started (9600) $150 plus shipping
A set of gridded tail lights for camaro $40 plus shipping
Three distributor caps (2 with coil) $15 plussing each $5 w/o coil plus shipping
DEI spark plug wire protection kit $60 plus shipping
Speaker mounts rare $100 shipped
82-84 rear rocker panels $40 shipped
Heater core $25 shipped
Spal computer control $230 shipped OBO
HID kit for low beams $120 shipped and i also have the high beams but just bulb/housing for the HID kit $65 plus shipping FULL set $160
Will be posting more parts as i go thru them. everything is OBO..
http://s543.photobucket.com/user/che...aro%20Exterior
The engine It has zero driving miles.
Pro 5 shifter - $120 shipped
Two master slave cylinder $15 plus shipping each
Power master started (9600) $150 plus shipping
A set of gridded tail lights for camaro $40 plus shipping
Three distributor caps (2 with coil) $15 plussing each $5 w/o coil plus shipping
DEI spark plug wire protection kit $60 plus shipping
Speaker mounts rare $100 shipped
82-84 rear rocker panels $40 shipped
Heater core $25 shipped
Spal computer control $230 shipped OBO
HID kit for low beams $120 shipped and i also have the high beams but just bulb/housing for the HID kit $65 plus shipping FULL set $160
Will be posting more parts as i go thru them. everything is OBO..
http://s543.photobucket.com/user/che...aro%20Exterior
Last edited by 83C_CamAroZ28; Sep 20, 2013 at 11:24 AM.
Junior Member
iTrader: (5)
Joined: May 2010
Posts: 37
Likes: 1
Car: 82' Z28
Engine: 5.7L 350
Transmission: ST10
Axle/Gears: 3.42
Re: Partting out My 83 Camaro Z28
I need the top fan shroud (or both), the passenger ground effect, fog lights if in good shape and passenger mirror of it's power. Let me know what you want for each piece shipped to 59804 man
Thread Starter
Member
iTrader: (12)
Joined: Sep 2009
Posts: 452
Likes: 0
From: Norwalk, CA
Car: 1983 Z-28
Engine: 5.7 L
Transmission: T-5
Trending Topics
Supreme Member
iTrader: (8)
Joined: Aug 2003
Posts: 7,240
Likes: 6
From: LeRoy, NY
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: Partting out My 83 Camaro Z28
Looking for all of the exhaust hangers except the ones on the tailpipes (but including the one on the intermediate pipe).
Thread Starter
Member
iTrader: (12)
Joined: Sep 2009
Posts: 452
Likes: 0
From: Norwalk, CA
Car: 1983 Z-28
Engine: 5.7 L
Transmission: T-5
Thread Starter
Member
iTrader: (12)
Joined: Sep 2009
Posts: 452
Likes: 0
From: Norwalk, CA
Car: 1983 Z-28
Engine: 5.7 L
Transmission: T-5
Junior Member
Joined: Jul 2012
Posts: 68
Likes: 0
From: San Jose, CA
Car: 1991 RS
Engine: 5.0 TBI H.O. soon to be LS3 6.2l
Transmission: 700r4 - Soon to be T56
Axle/Gears: Moser 9" LSD, 3.54 Gears
Re: Partting out My 83 Camaro Z28
Do you still have your aluminum Driveshaft?
Was it the 3R or 1350 Yoke ?
I saw that you had a 9 inch and was wondering if that was the correct driveshaft to fit the swap.
Also if you have any fog lamps (camaro w/ Hardware+wiring), Grey Sail panels, Center console with the button and spring still in tact, Grey Driver seat side seat belt guides (with screws ?), Power antenna, Auto 89+ transmission shifter plate ONLY, better question would be is do you have any grey interior?
Also Functional Rear hatch Motor, Rear View mirror with lamp?
PM if you have any of this information/ on the items (driveshaft particularly)
Thanks !
Was it the 3R or 1350 Yoke ?
I saw that you had a 9 inch and was wondering if that was the correct driveshaft to fit the swap.
Also if you have any fog lamps (camaro w/ Hardware+wiring), Grey Sail panels, Center console with the button and spring still in tact, Grey Driver seat side seat belt guides (with screws ?), Power antenna, Auto 89+ transmission shifter plate ONLY, better question would be is do you have any grey interior?
Also Functional Rear hatch Motor, Rear View mirror with lamp?
PM if you have any of this information/ on the items (driveshaft particularly)
Thanks !
Thread Starter
Member
iTrader: (12)
Joined: Sep 2009
Posts: 452
Likes: 0
From: Norwalk, CA
Car: 1983 Z-28
Engine: 5.7 L
Transmission: T-5
Re: Partting out My 83 Camaro Z28
Do you still have your aluminum Driveshaft?
Was it the 3R or 1350 Yoke ?
I saw that you had a 9 inch and was wondering if that was the correct driveshaft to fit the swap.
Also if you have any fog lamps (camaro w/ Hardware+wiring), Grey Sail panels, Center console with the button and spring still in tact, Grey Driver seat side seat belt guides (with screws ?), Power antenna, Auto 89+ transmission shifter plate ONLY, better question would be is do you have any grey interior?
Also Functional Rear hatch Motor, Rear View mirror with lamp?
PM if you have any of this information/ on the items (driveshaft particularly)
Thanks !
Was it the 3R or 1350 Yoke ?
I saw that you had a 9 inch and was wondering if that was the correct driveshaft to fit the swap.
Also if you have any fog lamps (camaro w/ Hardware+wiring), Grey Sail panels, Center console with the button and spring still in tact, Grey Driver seat side seat belt guides (with screws ?), Power antenna, Auto 89+ transmission shifter plate ONLY, better question would be is do you have any grey interior?
Also Functional Rear hatch Motor, Rear View mirror with lamp?
PM if you have any of this information/ on the items (driveshaft particularly)
Thanks !
Thread Starter
Member
iTrader: (12)
Joined: Sep 2009
Posts: 452
Likes: 0
From: Norwalk, CA
Car: 1983 Z-28
Engine: 5.7 L
Transmission: T-5
Thread
Thread Starter
Forum
Replies
Last Post