[Wanted] 862 or 706 heads, wiring harness, ecm
Thread Starter
Junior Member
iTrader: (8)
Joined: May 2008
Posts: 33
Likes: 0
From: Wall, TX
Car: 1989 Camaro RS
Engine: Soon to be LS.
Transmission: Auto
Axle/Gears: Need some
862 or 706 heads, wiring harness, ecm
I am looking for a set of heads, a LS wiring harness, and a ecm. If anyone has anything please let me know how much shipped to 88310. Thanks
Thread Starter
Junior Member
iTrader: (8)
Joined: May 2008
Posts: 33
Likes: 0
From: Wall, TX
Car: 1989 Camaro RS
Engine: Soon to be LS.
Transmission: Auto
Axle/Gears: Need some
Re: 862 or 706 heads, wiring harness, ecm
Just let me know. I am still overseas TDY right now, but should be home in the next week or so, so I will be ready for it by then.
Thread Starter
Junior Member
iTrader: (8)
Joined: May 2008
Posts: 33
Likes: 0
From: Wall, TX
Car: 1989 Camaro RS
Engine: Soon to be LS.
Transmission: Auto
Axle/Gears: Need some
Re: 862 or 706 heads, wiring harness, ecm
Still looking if anyone comes across anything. Mostly need the wiring harness and the ECM.
Member
iTrader: (3)
Joined: Nov 2003
Posts: 175
Likes: 0
From: york, SC
Car: 1989 formula
Engine: LS1
Transmission: T-56
Axle/Gears: 9-bolt & 3:45 gears
Re: 862 or 706 heads, wiring harness, ecm
I have a complete wiring harness that came out of a 2002 camaro ss with the LS1 and a t56. It is complete and uncut. Most connectors are labeled. There is no ECM with this harness. I can $225 shipped to you.
Joined: Jun 2006
Posts: 576
Likes: 4
From: Gobles, Michigan
Car: 92 Ttop Z28
Engine: Cammed 6.0
Transmission: T-56
Axle/Gears: Built 10 bolt-3.90s w/ PBR discs
Re: 862 or 706 heads, wiring harness, ecm
I have a 0411 PCM, 50 plus shipping. This would be compatable with meefy's harness.
Last edited by 25th327RS; Sep 2, 2013 at 02:48 PM.
Trending Topics
Thread Starter
Junior Member
iTrader: (8)
Joined: May 2008
Posts: 33
Likes: 0
From: Wall, TX
Car: 1989 Camaro RS
Engine: Soon to be LS.
Transmission: Auto
Axle/Gears: Need some
Re: 862 or 706 heads, wiring harness, ecm
Meefy - I just picked up a harness off LS1tech earlier today. I couldn't pass it up for what the guy was selling it for. Thank you though.
25th - I am actually going to be on a plane back home for the next two days, so let me know how much you want shipped to 88310, and as soon as I can I will let you know something.
25th - I am actually going to be on a plane back home for the next two days, so let me know how much you want shipped to 88310, and as soon as I can I will let you know something.
Thread
Thread Starter
Forum
Replies
Last Post