Just recently did a TPI swap on my 92 RS. Need old TBI take-off parts gone!
The car had 125,000 miles on it when parts were removed. The car ran great with no issues whatsoever.

187 Casting # Swirl Port heads, fully assembled: $75
TBI Intake manifold: $40 **SOLD**
TBI throttle body w/injectors: $40 **SOLD**
TBI Wiring harness, from 1992 Automatic car, no cuts, fully intact: $40
TBI ECM w/ two Hypertech PROMs: $60
StreetMaster and ThermoMaster PROMs included
(don't have the OEM PROM, wasn't there when I bought the car)
TBI air cleaner: $15
TBI air intake bellows: $15
TBI stock camshaft: $20
VSS Buffer Box: $20
ESC Box: $20
OEM Valve Covers, Black, cleaned, need painted: $10
Chrome Chevrolet Valve Covers, cleaned, chrome is good!: $20 **SOLD**
Starter from an older IROC, don't know what year, didn't fit my '92: $50
As far as I can tell the starter is new, still has barcodes on it
came with a box of parts I bought a TPI system with.
Alternator off an early IROC, don't know what year, doesn't fit my '92: $40
This is also new from what I can tell, still has barcodes on it
came with a box of parts I bought a TPI system with.
TBI Throttle Cable: $10
TBI Throttle Valve (TV) Cable: $10
TBI Cruise Control Cable: $10

All prices do not include shipping, let me know where you want things shipped and I can give you a shipping cost. I hope people on here can use this stuff, I hate for any of it to go to someone other than my fellow third gen owners. All of this stuff is off of an award winning car, many top three trophies I've won with this car, the engine parts need cleaned up a bit but I can run any of it through a parts washer prior to shipping if desired. I would also prefer not to ship the cylinder heads, they are heavy SOB's and I would imagine you don't want to pay for the shipping either as it will be PRICEY, far more than what the heads are worth. But I will ship if needed. I think my pricing is very fair but please shout out any offers if desired and I'll consider it. Local pick-up on any of these items would be preferred. I'm in Brunswick, Ohio. I will arrange a meeting spot to swap parts for cash. I can post pics of any of these items if desired.

 

TBI intake manifold and TBI trottle body with injectors to 78415?

 

Sorry, I got home a lot later than anticipated yesterday. I will get those parts weighed up and quoted for you when I get home today.

 

Looks like it'll be $40 to ship if I use UPS or Fedex. Let me know. Would you need the fuel lines that go with that, I'll throw those in. Not the chassis lines but there are hard lines directly off the throttle body that go to soft lines between that and the chassis. I have both the hard and soft lines. If you need any other parts I have for this we can make a bundle deal. Oh, and the manifold has the EGR valve and sensors still attached, throttle body also still has the throttle position sensor, the idle air control I did salvage and use on my tpi swap so that is not included.

 

pm sent.

 

pm replied...

 

bump for some good parts

 

Hi. I sent you a pm about getting pics of the harness and valve covers.
Thanks

 

I will send pictures in a few minutes. I have a possible sale pending on the harness but I will send you pictures anyway, I just took them. Oh, and yes it is for an automatic.

 

bump

 

Would you take $40 for the ECM including shipping to 97016? I don't need the Chips? Email me if interested.
gregl316@hotmail.com
greg

 

pm sent

 

The PROM's won't sell on their own, more than likely, the Hypertech ones are not really worth anything. I don't really want the ECM gone without the PROM's going with it. At $60 I was pretty much just throwing in the PROM's with the cost of the ECM and even at $60 that's a pretty good price for an ECM be it TBI, TPI or anything. Just trying to dwindle down my piles and piles of parts.

 

bump for some good parts!

 

bump....

 

bump....

 

still have them valve covers an can i see a pic

 

Yes, still have the valve covers, i can send you pics when i get home from work.

 

May be interested in TBI air cleaner. Pictures?

 

Thanks!

 

PM sent with pictures

 

Got it but I found my stock assembly that I though I threw away. Thanks though. On another not, interested in the chrome valve covers only if they are center bolt and have some type of gm or Chevy logo on them. Looking to dress my crate motor

 

i got dibs on the chrome valve covers bud.

 

Yeah, sorry, codyscamaroz28 did get to me on the chrome valve covers first so he has the right of way to them. I have the factory valve covers if you want those, they need a paint job but you could paint them however you want. Up to you!

 

Got the bowtie valve covers in today love them great deal, Thanks again!

 

I need a good Engine harness, Price shipped to 61080, Ill? Thank's, Bill.