Hey thirdgen camaro guys, how about posting your blood,sweat and tears!!!
07-24-2001, 06:35 PM
#1
Supreme Member
Thread Starter
Join Date: Dec 2000
Location: United States
Posts: 2,078
Likes: 0
Received 0 Likes
on
0 Posts
Hey thirdgen camaro guys, how about posting your blood,sweat and tears!!!
Hey guys, how about posting some of your modifed 3rd gen camaros, and camaros only, im sort of sick of firebirds, please dont post webpages, just one pick should suffice, i would like to see some of your modified camaros, if possible...
------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"
Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.
------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"
Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.
07-24-2001, 07:50 PM
#2
Supreme Member
Join Date: Nov 2000
Location: Newark, DE
Posts: 1,760
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86' Z28
Engine: 355
Transmission: T-56
how bout a pic of yours? I see this huge *** sig of yours, and all your talk about it, but i've yet to see it. Sorry i can only link to mine, geocities sucks 
My car
------------------
My 1986 Z28
GM350, T-5, 3.23's, lots of go fast goodies, 4th gen Firebird interior etc...
85 IROC w/ 1364 miles!
You'll always find what you've lost in the last place you look
R.I.P Dale Earnhardt
My car
------------------
My 1986 Z28
GM350, T-5, 3.23's, lots of go fast goodies, 4th gen Firebird interior etc...
85 IROC w/ 1364 miles!
You'll always find what you've lost in the last place you look
R.I.P Dale Earnhardt
07-24-2001, 08:02 PM
#3
Banned
Join Date: Mar 2001
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
My Engine
My Car
------------------
92 Z28 5.7
------------------
Trick Flow 23° heads, Comp Cams XR270HR-10 cam, Accel intake base + ported TPI,
TES headers, Flowmaster catback, MSD ignition, #24 SVO injectors, 1LE aluminum driveshaft.
Click here to see pics of my car !
My Car
------------------
92 Z28 5.7
------------------
Trick Flow 23° heads, Comp Cams XR270HR-10 cam, Accel intake base + ported TPI,
TES headers, Flowmaster catback, MSD ignition, #24 SVO injectors, 1LE aluminum driveshaft.
Click here to see pics of my car !
07-24-2001, 09:25 PM
#7
Supreme Member
Join Date: Oct 1999
Location: Happy Valley, Oregon
Posts: 3,625
Likes: 0
Received 0 Likes
on
0 Posts
Any excuse to post pics, right? 
So many to choose from, but I think those will do.
------------------
'86 Camaro Sport Coupe and '88 IROC
So many to choose from, but I think those will do.
------------------
'86 Camaro Sport Coupe and '88 IROC
Trending Topics
07-25-2001, 06:42 PM
#10
Supreme Member
Thread Starter
Join Date: Dec 2000
Location: United States
Posts: 2,078
Likes: 0
Received 0 Likes
on
0 Posts
Believe me id post my pic if it were possible, i mean i have pics of my 92' camaro and the 71' duster, but i dont have a damn clue on how to post them, i may be stupid or somthing but im new to this computer thing, and if someone could clarify exactly what do i have to do in order to post a pic of my 2 sweet rides in this post, oh yeah did i mention, im adding a 3rd member to my family thats right a HEMI cuda.
07-25-2001, 08:38 PM
#11
Supreme Member
Join Date: Nov 2000
Location: Newark, DE
Posts: 1,760
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86' Z28
Engine: 355
Transmission: T-56
vortech. If you have a scanner, or have any friends that do, all you have to do is scan them in, and save them as .Jpg's. then you can either go to a place like photopoint and pay a bit for the service, or create a homepage on something like geocites (very easy, just go to www.geocities.com and follow directions). If all that is still over your head, you can just go to the readers ride section of the site and add your ride. There will be three spots to put pictures, click the browse button, it will show all the files on your hardrive. Find the name of the pic, click on it, and hit OK. Your pic should load onto the site, and whoala, we'll all be able to see your ride(s). your still gonna have to link to them, but thats just as simple as typing the address in and posting it. Its pretty easy once you get the hang of it.
Eric
------------------
My 1986 Z28
GM350, T-5, 3.23's, lots of go fast goodies, 4th gen Firebird interior etc...
85 IROC w/ 1364 miles!
You'll always find what you've lost in the last place you look
R.I.P Dale Earnhardt
Eric
------------------
My 1986 Z28
GM350, T-5, 3.23's, lots of go fast goodies, 4th gen Firebird interior etc...
85 IROC w/ 1364 miles!
You'll always find what you've lost in the last place you look
R.I.P Dale Earnhardt
07-26-2001, 02:23 AM
#13
Junior Member
Join Date: Oct 1999
Location: Omaha, Nebraska
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Here are a few pics, not really modified except for new paint...
Later...
------------------
DEEP RED 87 IROC-Z
350, 5.7 TPI, auto
Few bolt on mods
-3" Flowmaster catback system
-Accel plugs, wires, and distributor cap
-MSD coil
-K&N Airfilters
-SLP Airfoil
-Brand new paint job
-Hypertech Thermomaster Power Chip
-Hypertech 160 degree thermostat
-Macewen white face overlays
-Xenon Blue bulbs from Macewen
More to come soon!!
Later...
------------------
DEEP RED 87 IROC-Z
350, 5.7 TPI, auto
Few bolt on mods
-3" Flowmaster catback system
-Accel plugs, wires, and distributor cap
-MSD coil
-K&N Airfilters
-SLP Airfoil
-Brand new paint job
-Hypertech Thermomaster Power Chip
-Hypertech 160 degree thermostat
-Macewen white face overlays
-Xenon Blue bulbs from Macewen
More to come soon!!
07-26-2001, 03:23 AM
#14
Supreme Member
iTrader: (1)
Join Date: Apr 2000
Location: Northern CA.
Posts: 5,321
Likes: 0
Received 4 Likes
on
4 Posts
Car: '82 Z28
Engine: 350
Transmission: TH400 4,000 stall
Axle/Gears: Currie 9", 4.56 gears
Before
Durring
After
Just picked up a 350 motor today to build up so the mods continue.
------------------
'82 Z28
LG4 305 .030 over, performer intake, holley street avenger 670, xe 256 cam, tes headers, 3 inch single exhaust, spintech muffler, 14 x 3 inch drop base k&n.
Durring
After
Just picked up a 350 motor today to build up
so the mods continue.------------------
'82 Z28
LG4 305 .030 over, performer intake, holley street avenger 670, xe 256 cam, tes headers, 3 inch single exhaust, spintech muffler, 14 x 3 inch drop base k&n.
07-26-2001, 07:31 AM
#15
Supreme Member
iTrader: (10)
Join Date: Dec 2000
Location: Somewhere around the South Side of Chicago just crusin' in one of the Niteriders
Posts: 3,242
Likes: 0
Received 3 Likes
on
3 Posts
Car: 92RS 25th Anniv./88 IROC Z28 Vert
Engine: 305 TBI w/Tpi Air / 305 TPI
Transmission: 700r4/700r4
Axle/Gears: Posi
A work in progress. Just replaced the entire interior last week. The speed and chrome mods are next. Watch out!
------------------
86 Camaro Black SS Coupe, T Tops, Flowmaster, Custom Paint, Dunlop Road Kings S/R tires, Wheel Country Directional Chrome Wheels, New Leather seats, new carpet and headliner, complete front end suspension rebuild, new Valve seals, and more mods to come
http://www.angelfire.com/sports/niterider/86camaro.html
Morgan_Andre@hotmail.com
------------------
86 Camaro Black SS Coupe, T Tops, Flowmaster, Custom Paint, Dunlop Road Kings S/R tires, Wheel Country Directional Chrome Wheels, New Leather seats, new carpet and headliner, complete front end suspension rebuild, new Valve seals, and more mods to come
http://www.angelfire.com/sports/niterider/86camaro.html
Morgan_Andre@hotmail.com
07-26-2001, 08:02 PM
#16
Supreme Member
Thread Starter
Join Date: Dec 2000
Location: United States
Posts: 2,078
Likes: 0
Received 0 Likes
on
0 Posts
07-26-2001, 09:43 PM
#17
Supreme Member
Join Date: Nov 2000
Location: Newark, DE
Posts: 1,760
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86' Z28
Engine: 355
Transmission: T-56
shweet
now where's that thirdgen?
------------------
My 1986 Z28
GM350, T-5, 3.23's, lots of go fast goodies, 4th gen Firebird interior etc...
85 IROC w/ 1364 miles!
You'll always find what you've lost in the last place you look
R.I.P Dale Earnhardt
[This message has been edited by zupmanZ28 (edited July 26, 2001).]
now where's that thirdgen?
------------------
My 1986 Z28
GM350, T-5, 3.23's, lots of go fast goodies, 4th gen Firebird interior etc...
85 IROC w/ 1364 miles!
You'll always find what you've lost in the last place you look
R.I.P Dale Earnhardt
[This message has been edited by zupmanZ28 (edited July 26, 2001).]
07-26-2001, 11:19 PM
#18
Supreme Member
iTrader: (1)
Join Date: Jan 2000
Location: san jose, ca
Posts: 1,110
Likes: 0
Received 6 Likes
on
6 Posts
Car: 1990 IROC-Z (De-Badged-Carbon Hood)
Engine: Superram 383
Transmission: T-56 w/upgraded Viper Internals
Axle/Gears: 3.73 18x8 and 18x11 irocs
Here is about $17,000 worth of blood sweat and tears.......
Tommy
------------------
Mr. IROC-Z
WWW.IROCZDESIGNS.COM Because looks are everything.
Tommy
------------------
Mr. IROC-Z
WWW.IROCZDESIGNS.COM Because looks are everything.
07-27-2001, 09:36 PM
#19
Supreme Member
Thread Starter
Join Date: Dec 2000
Location: United States
Posts: 2,078
Likes: 0
Received 0 Likes
on
0 Posts
sorry for not putting my 92' camaro pic, but i send it to CAR CRAFT. It was the only pic i had, never really took pics of my car, although i just took pics of it 2 days ago so ill develop it and put it up tomorrow(saturday) laters
07-28-2001, 12:46 PM
#20
Member
Join Date: Jul 2001
Location: NSW Australia
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Boy Mr Iroc.....I love those wheels.....where did you get them what brand/model are they?
------------------
1982 Camaro Z28
305 Carburated
4-speed Muncie
Some other stuff I haven't figured out yet
------------------
ICQ# : 18562788
gibsandwich@hotmail.com
------------------
1982 Camaro Z28
305 Carburated
4-speed Muncie
Some other stuff I haven't figured out yet
------------------
ICQ# : 18562788
gibsandwich@hotmail.com
Thread
Thread Starter
Forum
Replies
Last Post
