When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
LED Classic Style Sealed Beam Headlights, from Holley/Morimoto
Auto Detailing and AppearanceShare tips and tricks on how to make your Third Gen shine! Get opinions on products or how something tasteful looks on your Chevrolet Camaro or Pontiac Firebird.
I just looked more closely... those appear to be the EXACT connectors I got.
the open wire end has a connector you push those ends through (in the way you want to pin it) and that plugs into the car side.
So far so good. Working on the bezels today for easy bulb changes lol
Re: LED Classic Style Sealed Beam Headlights, from Holley/Morimoto
Reviving this thread for the Holley Days.
On the Holley/Hooker website, these headlights are on sale until December 31. Not huge savings, about $20-$80/pair, depending upon size, which is better than nothing. Also, and more importantly, there are some new options listed for the 4x6 headlights.
Edit: Something worth noting is that Holley has these headlights listed for the Holley Days sale in the "clearance" section, lumped with the "clearance" parts. Not sure what that means, but people who might be interested in these headlights should probably take advantage of the sale now, or, at least, get in touch with Holley to find out future status. I don't think they're going away, but it would be sad to see them go already, IF that's the plan.
Last edited by LAFireboyd; 12-17-2022 at 09:12 PM.
Re: LED Classic Style Sealed Beam Headlights, from Holley/Morimoto
Thanks for posting this updated info LAFireBoyD ! I saw the price drop and for $40 savings on each light, I decided that now was the time to pull the trigger on two 3,000K 4x6" lights . Grand total after tax was $345.38 and shipping is free. Its also a bonus that these are plug and play now too.
Re: LED Classic Style Sealed Beam Headlights, from Holley/Morimoto
Originally Posted by vorteciroc
One of my earliest Projects for Third-Gens...
Was to revamp and Update/ Upgrade the Entire Exterior Lighting System.
(Interior System came nest).
All exterior Bulbs, Sockets, and Connectors were Updated/ Upgraded to modern Parts.
For example, Front and Rear Parking Lights ... as well as Signal/ Stop Lights...
changed to 3056 and 3057 Push-In Bulbs (No more Push-and-Twist Bayonet Bulbs):
and of course Sealed Delphi Mixed Metri-Pack Connectors (most are re-buildable: Wire Seals, Terminals, Sockets, and Socket Seals):
I absolutely LOVED making entire New Harnesses for the Exterior Lighting System!
Can you share part numbers or a link to the weatherpack connectors you used?
Re: LED Classic Style Sealed Beam Headlights, from Holley/Morimoto
I can...
However, I modify the Lamp Housings to receive the New Lamp Sockets.
This is NOT a "Plug and Play" change for the Lights.
This Modification requires cutting out the area of the Lamp Housing that has the Key-Way for the Socket to lock into.
I use a Drill (Hole Saw Bit) for the Diameter of the Key-Way and remove it.
Obtain a Newer GM Lamp that uses the 3056/ 3157 Blade Style Push-In Bulbs and harvest the Key-Way from it.
I Plastic-Weld the New Key-Ways to Our Parking Lamps and Tail Lamps, to use the 3056/ 3157 Blade Style Push-In Bulbs.
If you want the Connector information for this Modification, let me know...
I will Look it up in my Notes.
Re: LED Classic Style Sealed Beam Headlights, from Holley/Morimoto
Originally Posted by vorteciroc
I can...
However, I modify the Lamp Housings to receive the New Lamp Sockets.
This is NOT a "Plug and Play" change for the Lights.
This Modification requires cutting out the area of the Lamp Housing that has the Key-Way for the Socket to lock into.
I use a Drill (Hole Saw Bit) for the Diameter of the Key-Way and remove it.
Obtain a Newer GM Lamp that uses the 3056/ 3157 Blade Style Push-In Bulbs and harvest the Key-Way from it.
I Plastic-Weld the New Key-Ways to Our Parking Lamps and Tail Lamps, to use the 3056/ 3157 Blade Style Push-In Bulbs.
If you want the Connector information for this Modification, let me know...
I will Look it up in my Notes.
I appreciate the offer but now knowing I'd have to cut/modify the housing it turns out I'm not that interested.
03-08-2022, 01:17 PM
