View Poll Results: Help to choose the color
Voters: 24. You may not vote on this poll
Poll Help me choose...
#1
Junior Member
Thread Starter
Join Date: Oct 2006
Location: Snellville, GA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 RS Camaro (Z28 Clone)
Engine: LS6, Vengeance VRX5
Transmission: T56, LS7 Clutch
Axle/Gears: Moser 12 bolt 3.73:1 ratio
Poll Help me choose...
Help me out with choosing the color to paint my 88 RS. Here is a pic of her in current visual condition. She looks a little rough around the edges but she's solid and clean inside and out aside from the slight grazing on the front bumper cover and the heavily faded paint.
My options are leave her white and add the Black Heritage stripes. Leave her white with out stripes. Paint her the same color Blue as my 01 Blazer (see next photo for reference) With or with out Black Heritage stripes. Or I could go Black with or without Gray Heritage stripes.
Thanks for the help guys I am just really stuck on this and I would like some input before I jump into this. By the way I am planning on getting the body work and paint done before I return to the states from my current deployment to Iraq.
-Kevin
My options are leave her white and add the Black Heritage stripes. Leave her white with out stripes. Paint her the same color Blue as my 01 Blazer (see next photo for reference) With or with out Black Heritage stripes. Or I could go Black with or without Gray Heritage stripes.
Thanks for the help guys I am just really stuck on this and I would like some input before I jump into this. By the way I am planning on getting the body work and paint done before I return to the states from my current deployment to Iraq.
-Kevin
#2
Member
Join Date: Feb 2006
Location: South East Michigan
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Firebird / 1985 Trans-Am
Engine: 305 4BBL / 383 4BBL++
Transmission: 700R4 / 700R4
Axle/Gears: ?.?? / 3.47
Re: Poll Help me choose...
I picked black and gray, I don’t think I have seen to many of those, and the ones I have, have looked really nice. I think pure black can also look really nice.
#4
Junior Member
Thread Starter
Join Date: Oct 2006
Location: Snellville, GA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 RS Camaro (Z28 Clone)
Engine: LS6, Vengeance VRX5
Transmission: T56, LS7 Clutch
Axle/Gears: Moser 12 bolt 3.73:1 ratio
Re: Poll Help me choose...
ttt thanks for the feedback guys. I do need more though so keep it coming.
-Kevin
-Kevin
Trending Topics
#9
Supreme Member
Join Date: Jan 2007
Location: Bastrop, TX
Posts: 1,002
Likes: 0
Received 12 Likes
on
11 Posts
Car: 1988 SC Convertible
Engine: LT-1
Transmission: 700R4
Axle/Gears: 3.23 posi w/PBR's
Re: Poll Help me choose...
I'd go a little different route. How about the dark blue with white stripes? Add white wheels and it looks bad *** and really stands out.
#11
Member
Join Date: Jan 2008
Location: funro loserana
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 rs
Engine: tbi 350
Transmission: 700r/manual
Axle/Gears: 3.23
Re: Poll Help me choose...
I chose black with grey stripes because I think the grey compliments our rims and interior, well at least if you have the grey style interior.
#12
Member
iTrader: (3)
Join Date: Dec 2006
Location: Estes Park, Co.
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Trans Am
Engine: 355 c.i.
Transmission: 5 spd.
Axle/Gears: 3:42s
Re: Poll Help me choose...
IMO, I would leave it white. Add stripes if ya want, but if you paint it black the small rock chips you will no doubt get will chip down to the original white . That is unless you strip it down to bare metal. Not only that a color change that different will be very labor intensive and costly to do it right. Good luck on your choice, have fun!
#13
Junior Member
Thread Starter
Join Date: Oct 2006
Location: Snellville, GA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 RS Camaro (Z28 Clone)
Engine: LS6, Vengeance VRX5
Transmission: T56, LS7 Clutch
Axle/Gears: Moser 12 bolt 3.73:1 ratio
Re: Poll Help me choose...
TTT once more. Thank you guys for all the input.
-Kevin
-Kevin
Thread
Thread Starter
Forum
Replies
Last Post