BodyGeneral body information and techniques for repairing, restoring, and modifying your car.
Sponsored by ThirdGen Ranch
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
this project took me a while to complete...
didnt want to pay for the hawks wing.
hopefully it last long.
it still needs minor adjustmeants such as the passenger side..
i used bunch of fiberglass resin squared off the edges to form the top. and filler on top.
looks like it held on pretty good
tell me what u guys think .
measure 6 inches. and 5 inches tall with a small crease.
something different that indeed looks good.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
i had pics of this while making it but.. i cant find them . pretty much used aanother lip and built it from bottom to top .
wish i can make a mold and sell them .. lol
Mods so far: MSD Cap and rotor, MSD ignition coil, Accel 8.8mm ignition wires, Hooker Super Comp Shortie Headers, Flowmaster 3in catback, underdrive crank pulley, BBK AFPR, custom cold air intake, NOS wet 125 shot, air foil and a lead foot! no E/T's yet. ...TURBO COMING SOON...Other mods include keyless entry and remote start, and Sequential Turn Signals. South Carolina ---> www.scfbaonline.com
i had pics of this while making it but.. i cant find them . pretty much used aanother lip and built it from bottom to top .
wish i can make a mold and sell them .. lol
Use a large single piece of Styrofoam cut and sanded to shape as a core. lay up the glass over it.
Really just posting this for those that wondered how it was done. the styro core is probably the easiest method. Don't know what you used as a core but it does look nice.
I know from experience that working with glass is much more of an art form than a mechanical skill. And I ain't no artist lol.
Looks like a well done job, but I think it looks kinda bulky. The ones I've seen look to have a much steeper angle on them, and I think this makes the different look. Funny though, I was actually thinking of doing something similar this winter too since I may not be doing anything to the drivetrain.
yeah this was somethin a bit different then the other ones like hawks.. maybe later ill give it a more curve like the duck one found on the 1nd gen trans ams.. idk yet
awesome i thought i was about to see some retarded spoiler and have to try to give "constructive criticism" on how to fix it but that thing looks spot on good work
i wish i can make a duplicate . unfortunately i dont have much time in my hands any more. today i finally had time and finsihed my fuel pump and dropped the car.
so far so good. maybe once or if it starts crackin i will add a layer of fiber glass on top and reshape it again. any ways i am looking for a emblem to add on the right corner what do u guys think?
The Spurs logo was billet, but sunk in level with the body surface, instead of setting on top Same with the side door molding. Bumper to bumper along the side, but sunk in, not just on top.
If you can mold a whole new spoiler, cutting a place for an emblem, like the SLP, shouldn't be very hard for you to do.
any pics of that emblem? is it the camaro emblem in the rear?
i want it to match and flow with the rest of the car. i have home made 69 blue bowtie grille, silver irocz decals sotck location and a slp badge in the rear. i have a pair of chrome gm excellence 2" emblems that i am might add in the same location as the c6 z06s have but not sure if they go with the car.
any pics of that emblem? is it the camaro emblem in the rear?
i want it to match and flow with the rest of the car. i have home made 69 blue bowtie grille, silver irocz decals sotck location and a slp badge in the rear. i have a pair of chrome gm excellence 2" emblems that i am might add in the same location as the c6 z06s have but not sure if they go with the car.
It's the Spurs logo, but gives you the concept of cutting the bowtie shape in & sinking a bowtie down.
dude that is an awesome job id buy that over the hawks anyday! for the rear it would be cool to sink the old school "Camaro" badge into and "clear" it over over so you can see the chrome emblem but its smooth to run your hand over you get what im sayin? cuz im not exactly sure i can explain it right lol like what stephen said but with no hole just smooth this is the logo im talkin about not the 350 one
yeah this was somethin a bit different then the other ones like hawks.. maybe later ill give it a more curve like the duck one found on the 1nd gen trans ams.. idk yet
So just a suggestion 
. and saving money
