MikeC.86Roc

LOCATED IN CENTRAL WISCONSIN

9-2-07 attached list updated / many prices dropped -- Re Priced rolling chassis for ONLY $200
as it sits in the picture, come get and its yours!
PLEASE SEE ATTACHED WORD DOCS FOR FULL DETAILS AT BOTTOM OF POST!. Full parts list and prices also in attached word document.

Here's a link for all the pictures (BE SURE TO CLICK ON THE "SUB ALBUMS" FOR ALL THE PHOTOS:

http://s4.photobucket.com/albums/y13...-Z/FOR%20SALE/

I am selling my 1988 Iroc-Z 5-speed. This car is in pieces, it is just a rolling chassis right now. God knows I want to keep it, but there's no way I can finish it in the next few years, so I am forced to sell EVERYTHING I have accumulated over the past 7 years for her. I am moving cross country and don't want to pack up and haul all this stuff. The car has been sitting in my back yard outside covered for a year now, so there’s surface rust that you can see in the pics. But I assure you, it is nothing serious, this car is from Georgia, and has no time on the road in Wisconsin whatsoever. No frame damage or major body damage. (Right rear panel needs a bit of bodywork attention)

Chassis : 1988 Iroc-Z, 8 point competition engineering rollbar kit. A/C delete and smoothed firewall. T-Tops, Rear mount battery. Poly motor mounts, new front balljoints, positrac rear with disc brake. This car has a custom dual exhaust, yes TRUE duals on this Iroc, with less then 100 miles on the flowmasters and Hooker Super Comp Long tube headers. Tilton mini starter can be included. T-5 TRANSMISSION IS SOLD!

I can't even begin to list all the parts. The interior is all it is really lacking, but LOTS of brand new parts. This car includes a COMPLETE set of Z-28 “aero” GFX and bumpers. NO IROC RIMS ON THIS CAR, CHECK PHOTOS….

I even have a high rise 5" spoiler form HAWKS for this thing, and some brand new interior parts.

Attached Files

LIST 9-2-07.doc (53.0 KB, 36 views)

ford hater

I am interested in the "Camaro Grille." can you send a pic to ppotvin@charter.net. Do you take paypal? thanks

MikeC.86Roc

Yes I accept Paypal.

The photobucket link has a picture of EVERYTHING guys.
But I went ahead and sent you a pic for it.

one wheel peel

how much for just the shell as it sits in picture?

IrocZ85

Do you happen to have a aftermarket shifter or Rear Control Arms?? and How much for the Panhard Bar, Thanks
Brian

david068513

same and duals

SDIF

How much for the t 5 and all related parts?

MikeC.86Roc

Ok.. For just the shell as it sits in the photos, i'd take $400 right now. Mostly because the rear axle is nearly worth that alone.

Add another $80 for the duals. Now the kicker is that the duals were built to mate up with a set of Hooker Super Comps. Those too are in all the pics. But I won't let those go yet for low ball pricing folks. If you want the shell, duals, and Hooker S.C's I would sell all of them for $825. The headers and mufflers have less then 30 miles use on em, they essentially new.

MikeC.86Roc

Depends how far you go with the "related parts" question I guess. But the transmission alone I would sell for $300. (I have receipts for a recent complete recondition too).

If you were doing an auto to 5-spd swap then I'd have to re-quote for "everything" (and I do have ALL of it, minus the clutch)

markymarco

what gears dose the rear end have in it

MikeC.86Roc

3.08's

ChevyCamaroZ-28

how much for the whole set up

MikeC.86Roc

$3400 for everything, but I'll take 3000 without the headers and starter.

SDIF

Can you give me a price on the t5 with bell housing, flywheel and all related parts to convert from auto?

And shipping to 29803

Codename 47

I can vouch for Mike. He's a good guy and all parts are as described.

He's also got two rear hatch shades for sale (No mounting hardware though). Good condition

phillip_helmet

How recently was the trans rebuilt? Do you have the torque arm mount for it?

MikeC.86Roc

I updated the post, the following are sold as of now:

T-5 tranny
Strut tower brace
Panhard bar
K&N filters

ted gerlach

how much for the spoiler and weatherstripping?

MikeC.86Roc

$200 for the spoiler.

As for the weatherstripping, depends on what parts you want. If you want everything I have left I will make you a package deal on it all. Check my price list and make me an offer for the items you need.

ted gerlach

spoiler was for a friend,

i was thinking about all except the cornners for the front edge of the window on the door,

MikeC.86Roc

Bump..

Lots of stuff still available. Check the attachment.


Also, anybody out there near Central Wisconsin, if you want the rolling shell I would probably GIVE IT AWAY at this point.

Any price in that attached list is negotiable by the way.

Still have a full set of the "aero" GFX and bumpers too.

Codename 47

Hey now.
Maybe you'll include it as a bonus with the headers?

redline86

That looks like you had a good start on a complete restore. That body looks very good and barely any surface rust would take ths chasis off of your hands but i live clear in ohio.

Hocheck

Wanted to see if u still have the rolling chassis. And do you have a title for it. I am interested if so. If u are still wanting to give it away Ill come take it off your hands.

loud91rs

Where in WI are you located? I might be interested in the chassis.

Codename 47

Wausau, Wi

Sonicbluecamaro

ill take the front gound spoiler on next payday if no one gets it

loud91rs

What's the deal on the price of the chassis now?

__________________

86 Camaro Z28 Hardtop **355, t5, 3:73 posi disc rear, 8pt cage
85 Camaro Z28 T-tops **Body work in progress, in primer waiting for paint. SS hood, 5" spoiler (both from hawks), shaved handles, shaved antenna hole, etc.

loud91rs

Ok one last post for now lol i lined up a truck and everything so pretty much I want the chassis. Let me know what's up and we'll come up with a trailer. I have a cabin up in tomahawk so I obviously know how to get there and will give me a reason to go up there again.