Car boggs out when high acceleration?
#1
Member
Thread Starter
Join Date: Oct 2011
Location: Paris Texas
Posts: 344
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro RS, 84 2.8 5speed
Engine: 305 5.0L
Transmission: Auto, 5 speed
Car boggs out when high acceleration?
I have a electric fuel pupm mounted under my gas tank(when i bought the car it was in the engine bay, and it was too much for the pump to handle and it gave out). I bought a pump just like it at autozone, the $45 one for v8 engines. When i try to race on anything too much my car sputters and dies, so i have to pop the hood and suck on a gas line to prime it again, what should i do? Get a better pump and regulator?
#4
Junior Member
Join Date: Jun 2011
Location: Maryland
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 camaro
Engine: 355 sbc
Transmission: th350
Axle/Gears: 4.56
Re: Car boggs out when high acceleration?
do you have a tpi? I believe the have a return set up at the rail.
#5
Member
Thread Starter
Join Date: Oct 2011
Location: Paris Texas
Posts: 344
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro RS, 84 2.8 5speed
Engine: 305 5.0L
Transmission: Auto, 5 speed
Re: Car boggs out when high acceleration?
no mines carbed, and in shop class we made the return line the fuel line
#6
Junior Member
Join Date: Dec 2009
Location: Huntsville, AL - San Antonio, TX is home
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro
Engine: LS 6.0 LQ4 + Turbo
Transmission: T56 6 Speed Manual
Axle/Gears: 4.11 For now
Re: Car boggs out when high acceleration?
Thats odd. Sounds like your pump aint doing its job. I usually mount them just in fron of the axle where the fuel line comes down from the tank. I'd try a better pump and of course mount it low. Make sure all you clamps are tight so that you're not sucking air.
#7
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Detention time.
Drop the tank, install a good pump like the Walbro mentioned, use a return-style regulator like a Mallory 4309 to drop the pressure down to a carb-friendly 4-7 psi, and use the supply line as a supply line and the return line as a return line.
Drop the tank, install a good pump like the Walbro mentioned, use a return-style regulator like a Mallory 4309 to drop the pressure down to a carb-friendly 4-7 psi, and use the supply line as a supply line and the return line as a return line.
Trending Topics
#8
Junior Member
Join Date: Oct 2009
Location: Jasper, IN
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 TA
Engine: 355 Carb
Transmission: 700r4 Built 2200 stall
Axle/Gears: 3.73
Re: Car boggs out when high acceleration?
I have a summit inline pump mounted above my gas tank and it does fine on my 355.
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
40
08-21-2015 02:12 PM