code43 patch in xdf? - Third Generation F-Body Message Boards

gt500pwr · 08-01-2006, 12:49 PM

Is there any way to set the code43 patch as a flag within an xdf file so that it can be engaged/disengaged by a set flag?

Mangus · 08-01-2006, 04:04 PM

Almost certainly, but before we can tell you how we'd need to know what ECM and mask you're talking about.

gt500pwr · 08-01-2006, 04:52 PM

it's an 8746 ecm with a 61 mask. I'm using jprevost 61v2.xdf and the stock ANTT bin. I've already done the rev limiter and code43 patches, the rev limiter patch is in the xdf and I want to add the code43 patch.

Thanks

Mangus · 08-01-2006, 04:55 PM

From the hack available here:
File Manager - Browsing directory /5) Source Code and Hacks/

Code:

LD43C: FCB $F3 ; 1111 0011, 243
   ; b7 code 43, ESC failure
   ; b6 code 44, O2 Lean
   ; b5 code 45, O2 Rich
   ; b4 code 51, EPROM error
   ;
   ; b3 code 52, Cal-pack missing, (NOT USED)
   ; b2 code 53, VATS, (NOT USED)
   ; b1 code 54, Fuel pump relay malfunction
   ; b0 code 55, ADU Error, netres/RTS ovrrun

gt500pwr · 08-02-2006, 04:14 PM

Thanks Mangus, but I'm still new to this. How can I modify the XDF file to read the correct info from the bin file and show a flag for it?

Thanks

Mangus · 08-02-2006, 04:28 PM

New flag.

Set the address to 43C.

Set the bit number to 7.

Name it Code 43 or whatever you want.

Click OK.

gt500pwr · 08-04-2006, 09:50 PM

Done, cool... thanks.