Aftermarket Eprom Question
04-07-2011, 05:32 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2009
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket Eprom Question
I bought 2 aftermarket chips for a 350 SD. TPI, AUJP- from 2 different well known TPI companies. What I would like to know is there a way to tell if the
Eprom they sent was orginally from a 350 TPI SD?? The 2 Eproms are very
different from each other. One even has a (what looks like a resistor) soldered to one of the small chips?
Eprom they sent was orginally from a 350 TPI SD?? The 2 Eproms are very
different from each other. One even has a (what looks like a resistor) soldered to one of the small chips?
04-07-2011, 05:58 PM
#2
Supreme Member
iTrader: (1)
Join Date: Apr 2004
Location: Browns Town
Posts: 3,178
Likes: 0
Received 3 Likes
on
3 Posts
Car: 86 Monte SS (730,$8D,G3,AP,4K,S_V4)
Engine: 406 Hyd Roller 236/242
Transmission: 700R4 HomeBrew, 2.4K stall
Axle/Gears: 3:73 Posi, 7.5 Soon to break
Re: Aftermarket Eprom Question
Might be able to figure it out using some of the info in this thread.
https://www.thirdgen.org/forums/diy-...49-memcal.html
https://www.thirdgen.org/forums/diy-...49-memcal.html
Last edited by JP86SS; 04-07-2011 at 05:59 PM. Reason: Ooops, posted page 2
Thread
Thread Starter
Forum
Replies
Last Post
