Hazards work, right turn signal doesnt
#1
Junior Member
Thread Starter
Join Date: Apr 2016
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Firebird Formula
Engine: 5.0L V8 305
Transmission: Auto
Hazards work, right turn signal doesnt
With all lights on, the green arrow for the right turn signal stays on. Additionally, When using left or right signal, neither of them pulse. Also, i am getting no power to the right turn signal In the front or rear when I should be. Left side I have power. However, with my hazards on, everything is normal. Fuses are good. Very confused. Help please
#3
Supreme Member
Join Date: Jan 2006
Location: Mooresville NC
Posts: 3,341
Likes: 0
Received 10 Likes
on
10 Posts
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Light Plight
After you verify the bulbs ►a common mistake is people installing 2 filament bulbs 180° rotated.◄
Using a voltmeter or test light (the type for testing for voltage, not a continuity tester) key in the RUN position, turn stalk in the right position, probe the dark blue wire out of the column.
Is there power there?
If no, you need to get to the switch, probe it at the switch and if still no power replace the switch.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
If We Don’t Get Cawt We Ain’t Cheatin’
Using a voltmeter or test light (the type for testing for voltage, not a continuity tester) key in the RUN position, turn stalk in the right position, probe the dark blue wire out of the column.
Is there power there?
If no, you need to get to the switch, probe it at the switch and if still no power replace the switch.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
If We Don’t Get Cawt We Ain’t Cheatin’
Thread
Thread Starter
Forum
Replies
Last Post