FS/FT B&M Console Megashifter
#1
Member
Thread Starter
iTrader: (3)
Join Date: Jul 2005
Location: Pittsburgh, PA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro
Engine: 350, 4bbl
Transmission: 700R4
Axle/Gears: GM, 3.23 posi
FS/FT B&M Console Megashifter - REDUCED
I have a B&M Console Megashifter that fits 3rd gen F-bodies (obviously).
I am looking to sell it or trade/partial trade for some LCA relocation brackets or Adjustable LCA's or centerbolt valve covers or ??. Let me know what you have.
I purchased this megashifter used (from somebody on tgo) about 1 year ago and have used it for about an additional 1000 miles (don't know how many miles were on it when I bought it). It works fine, I just don't like using it. I put the stock shifter back in.
The good:
It works just fine.
The bad:
-When I purchased it the front mounting bracket was missing, so I made one (yellow piece in the photos). It works fine.
-The bracket the connects to the tranny is rusted (surface rust, clean it up and paint it if you desire).
-The boot is torn, but not real bad (see photos).
-The indicator cable that tells you what gear you are in is finicky (i.e. it's hard to get it adjusted correctly, maybe you'll have better luck than I did).
$75 +shipping or Best Offer.
I am looking to sell it or trade/partial trade for some LCA relocation brackets or Adjustable LCA's or centerbolt valve covers or ??. Let me know what you have.
I purchased this megashifter used (from somebody on tgo) about 1 year ago and have used it for about an additional 1000 miles (don't know how many miles were on it when I bought it). It works fine, I just don't like using it. I put the stock shifter back in.
The good:
It works just fine.
The bad:
-When I purchased it the front mounting bracket was missing, so I made one (yellow piece in the photos). It works fine.
-The bracket the connects to the tranny is rusted (surface rust, clean it up and paint it if you desire).
-The boot is torn, but not real bad (see photos).
-The indicator cable that tells you what gear you are in is finicky (i.e. it's hard to get it adjusted correctly, maybe you'll have better luck than I did).
$75 +shipping or Best Offer.
Last edited by sjc115; 05-28-2007 at 06:49 AM.
#3
Re: FS/FT B&M Console Megashifter - REDUCED
just so happens that i have a set of relocations brackets that i don't think i will be using. they are brand new not even taken out of the package. i got them from umi and they are the weld in kind. paid about 60 before the shipping so what do you think?
#4
Member
Thread Starter
iTrader: (3)
Join Date: Jul 2005
Location: Pittsburgh, PA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro
Engine: 350, 4bbl
Transmission: 700R4
Axle/Gears: GM, 3.23 posi
Re: FS/FT B&M Console Megashifter
ohyeahjay: That's exactly what I am looking for. Sending PM...
Trending Topics
#8
Member
Thread Starter
iTrader: (3)
Join Date: Jul 2005
Location: Pittsburgh, PA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro
Engine: 350, 4bbl
Transmission: 700R4
Axle/Gears: GM, 3.23 posi
Re: FS/FT B&M Console Megashifter
hedshed38x: Still have it. Let me know if you are interested.
#9
Member
Thread Starter
iTrader: (3)
Join Date: Jul 2005
Location: Pittsburgh, PA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro
Engine: 350, 4bbl
Transmission: 700R4
Axle/Gears: GM, 3.23 posi
Re: FS/FT B&M Console Megashifter
Still for sale...
A couple of you sent me PM's that I did not receive an email notification to, so I am just getting back to you today. Sorry about the delay.
A couple of you sent me PM's that I did not receive an email notification to, so I am just getting back to you today. Sorry about the delay.
#13
Junior Member
Join Date: Feb 2006
Location: Willowick, OH
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Car: 96 Chevy P/U
Re: FS/FT B&M Console Megashifter - REDUCED
If no one else grabs it, how about $50 and I'll come pick it up or meet you somewhere around here?
Thread
Thread Starter
Forum
Replies
Last Post