Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
#1
Supreme Member
Thread Starter
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,155
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
Cam is hyd. roller with about one hour of run time!!! In great shape but I went bigger. Was originally a custom LT1 grind and the dowl pin has already been cut down for flawless gen I SBC use (duh, I used it )
I still have the cam card and the custom grind is Comp 3315/3316 on a 112 LSA.
.510/.520 lift
230/236 @ .050
If more info is needed please ask.
$200
Also, have a set of 7.400" Trickflow 1 piece chromoly pushrods. Practically new with same run time.
http://store.summitracing.com/partde...0&autoview=sku
$75
I still have the cam card and the custom grind is Comp 3315/3316 on a 112 LSA.
.510/.520 lift
230/236 @ .050
If more info is needed please ask.
$200
Also, have a set of 7.400" Trickflow 1 piece chromoly pushrods. Practically new with same run time.
http://store.summitracing.com/partde...0&autoview=sku
$75
#3
Supreme Member
Thread Starter
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,155
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
Yes, gen I and LT1 are the same.
1-8-4-3-6-5-7-2
1-8-4-3-6-5-7-2
#4
Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
Yes, thank you. I was just wondering... since it's a custom grind I thought it might be a 4/7 swap or C-swap or something.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
junkcltr
Tech / General Engine
6
08-02-2019 11:12 PM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
09-01-2015 04:32 PM