Big COMP Hyd Roller Cam
01-20-2009, 01:06 PM
#1
Supreme Member
Thread Starter
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,155
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Big COMP Hyd Roller Cam
Cam is hydraulic roller with about one hour of run time. In great shape but I went bigger.
I still have the cam card...it is Comp's 3315/3316 on a 112 LSA.
.510/.520 lift
230/236 @ .050
If more info is needed please ask.
$200 obo
I still have the cam card...it is Comp's 3315/3316 on a 112 LSA.
.510/.520 lift
230/236 @ .050
If more info is needed please ask.
$200 obo
02-07-2009, 03:10 PM
#6
Supreme Member
Thread Starter
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,155
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Big COMP Hyd Roller Cam
Both Gen I and LT1. For LT1 use you would need to pull out the shorter dowel pin and replace it with a longer LT1 pin, that's it.
Standard firing order.
The cam is perfect, the only thing you will notice is slight discoloration on a couple of the lobes seen in the last pic.
Standard firing order.
The cam is perfect, the only thing you will notice is slight discoloration on a couple of the lobes seen in the last pic.
Last edited by CamarosRUS; 02-15-2009 at 01:23 AM.
Trending Topics
02-12-2009, 01:21 PM
#8
Supreme Member
Thread Starter
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,155
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Big COMP Hyd Roller Cam
$150 shipped to Croatia is just not going to work. I'm sure the shipping will be $150.
02-14-2009, 10:32 PM
#10
Member
Join Date: Feb 2008
Location: Antelope Valley, Ca...So.Cal.
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Car: was 85 TA, 91 TA both sold
Engine: was 406, now 305 tpi
Transmission: 85 had700r4,350..91 had t5
Axle/Gears: 323,373,342
Re: Big COMP Hyd Roller Cam
still have the cam?
any cam # from comp so I can look up the info on it?
any cam # from comp so I can look up the info on it?
02-14-2009, 10:45 PM
#11
TGO Supporter
Join Date: Jul 2003
Location: Grand Rapids, MI
Posts: 4,803
Likes: 0
Received 0 Likes
on
0 Posts
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60
Re: Big COMP Hyd Roller Cam
Don't know if he has it or not, but I can attest to the fact that the numbers he has provided are Comp's Extreme Energy lobe profiles (3315 being the int lobe, 3316 being the exh) ground on a custom blank. Cam is designed for custom EFI friendliness.
02-16-2009, 12:38 PM
#13
Member
Join Date: Jan 2006
Location: Poland, Europe
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firebird 88
Engine: 406
Transmission: th400
Axle/Gears: 3.50
Re: Big COMP Hyd Roller Cam
Actually its not big, its only a bit bigger then ZZ4 which goes for 150$ including shipping to Europe.
02-16-2009, 01:55 PM
#14
Supreme Member
Thread Starter
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,155
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Big COMP Hyd Roller Cam
Bored Morit? Thanks for the bump.
This might work in a retrofit block but I am not sure. It is designed for factory hyd roller aps with the cam plate but I do not see why it would not work in a retro application with the correct cam button.
This might work in a retrofit block but I am not sure. It is designed for factory hyd roller aps with the cam plate but I do not see why it would not work in a retro application with the correct cam button.
Thread
Thread Starter
Forum
Replies
Last Post
junkcltr
Tech / General Engine
6
08-02-2019 11:12 PM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
09-01-2015 04:32 PM