SBC 383 Stroker Street/Strip 9 Sec motor
08-22-2009, 10:52 PM
#1
Member
Thread Starter
iTrader: (3)
Join Date: Dec 2005
Location: New Bedford, Ma
Posts: 159
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 IROC
Engine: Destroked 377
Transmission: TH-400
Axle/Gears: 9inch with 3.70's
SBC 383 Stroker Street/Strip 9 Sec motor
It went 11.20 in a 3300lbs camaro NA and 9.70 with a 250 shot of Nitrous. Awesome street motor. Runs on 93 pump gas. Can drive this thing anywhere
383 Stroker
• 4.040" bore 10.1:1 compression
• Eagle Cast Steel 3.750" Stroker Crank
• Reconditioned 5.7" Rods
• SRP Flat Top Forged Pistons 10.1:1 Compression
• JE Pro Seal Piston Rings
• Trickflow Hydraulic Flat Tappet Cam, Advertised Duration 308/316, Lift .495/.510, 112 Lobe
• Trickflow Billet Steel Double Roller Timing Chain
• Trickflow Hydraulic Flat Tappet Lifters
• Trickflow Heads, CNC 23 Degree, Aluminum, 72cc Chamber, 195cc Intake Runner
• Trickflow Chromemoly Pushrods 5/16" Diameter, 7.850" Length
• Trickflow 1.5 Aluminum Roller Rockers 3/8"
• Edelbrock Victor Jr Intake Single Plane 3500-8000rpm
• Moroso 7 Quart Oil Pan
• Summit High Volume Oil Pump
• ATI Balancer
I also have brand new stud girdles that i havent put on the motor yet
it comes oil pan to intake $3500
383 Stroker
• 4.040" bore 10.1:1 compression
• Eagle Cast Steel 3.750" Stroker Crank
• Reconditioned 5.7" Rods
• SRP Flat Top Forged Pistons 10.1:1 Compression
• JE Pro Seal Piston Rings
• Trickflow Hydraulic Flat Tappet Cam, Advertised Duration 308/316, Lift .495/.510, 112 Lobe
• Trickflow Billet Steel Double Roller Timing Chain
• Trickflow Hydraulic Flat Tappet Lifters
• Trickflow Heads, CNC 23 Degree, Aluminum, 72cc Chamber, 195cc Intake Runner
• Trickflow Chromemoly Pushrods 5/16" Diameter, 7.850" Length
• Trickflow 1.5 Aluminum Roller Rockers 3/8"
• Edelbrock Victor Jr Intake Single Plane 3500-8000rpm
• Moroso 7 Quart Oil Pan
• Summit High Volume Oil Pump
• ATI Balancer
I also have brand new stud girdles that i havent put on the motor yet
it comes oil pan to intake $3500
11-27-2009, 10:50 PM
#7
Member
iTrader: (2)
Join Date: Jan 2006
Location: Ettrick WI
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Z,92 RS,95 SS,00 WS6, 04 XUV
Engine: 383z,350RS, LT1, LS1 ,vortec 4.2
Transmission: 700R4, 700R4,4L60E,4L60E, Auto,
Re: SBC 383 Stroker Street/Strip 9 Sec motor
If I hadn't built my 388 , this engine would be mine , awesome deal. gl with the sale
Trending Topics
12-03-2009, 01:47 AM
#10
Junior Member
Join Date: Dec 2007
Location: Bethpage, NY
Posts: 53
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 Firebird
Engine: L03 : \
Transmission: T5
Axle/Gears: 10 bolt
Re: SBC 383 Stroker Street/Strip 9 Sec motor
If I didn't buy my new interior I'd take you up on this in a heartbeat. Good luck with the sale.
01-10-2010, 10:40 PM
#13
Senior Member
iTrader: (4)
Join Date: Feb 2009
Location: Camdenton, Mo/ St. Joseph, Mo
Posts: 588
Received 0 Likes
on
0 Posts
Car: 97 Cummins 92 CamaroZ28, 94 GSXR750
Engine: Modded 5.9 , carbed sbc358, modded
Transmission: Nv4500, 700R4 (for now)
Axle/Gears: stock
Re: SBC 383 Stroker Street/Strip 9 Sec motor
Wow i wish i had the money! That is exactly what I have been looking for ='(
Good luck, great price!
Good luck, great price!
01-11-2010, 07:36 PM
#17
02-25-2010, 08:31 PM
#21
Thread
Thread Starter
Forum
Replies
Last Post
mhatfield 14
Tech / General Engine
5
10-24-2015 07:48 AM
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 02:45 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
08-20-2015 09:36 PM
