[CA] Cleaning out Shed
03-30-2010, 11:19 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
[CA] Cleaning out Shed
All items are for sale because i am trying to raise money for better stuff for my car. please make me an offer I am Willing to trade for parts!! I have an 89 formula 5.0 TBI STOCK!
OLD diacom set up and program on floppy disk
1LE Blower motor and housing i hear these are rare.
MSD 6AL
Brand new Window motors
TPI fuel Rails.. i think there are different years i have 2 of them
TPI throttle body
I made this in school
Lower control arm relocation brackets
Power bulge cold air actuator from 82-84 i think... the solenoids are available but i dont know if they work.. these are for cross fire housings. if i am not mistaken these are kinda rare.. but not very usefull, unless you are like me and like rare stuff on your car. i have a working on on my 89 for my TBI with the unit made for carburator. not for sale.. lol but these 2 are for sale or trade ! door lock actuators make good substitute for flapper solenoids. Both are in really great condition and will clean up nice... no cracks. one contains the screen mesh and both contain the rain trough.
OLD diacom set up and program on floppy disk
1LE Blower motor and housing i hear these are rare.
MSD 6AL
Brand new Window motors
TPI fuel Rails.. i think there are different years i have 2 of them
TPI throttle body
I made this in school
Lower control arm relocation brackets
Power bulge cold air actuator from 82-84 i think... the solenoids are available but i dont know if they work.. these are for cross fire housings. if i am not mistaken these are kinda rare.. but not very usefull, unless you are like me and like rare stuff on your car. i have a working on on my 89 for my TBI with the unit made for carburator. not for sale.. lol but these 2 are for sale or trade ! door lock actuators make good substitute for flapper solenoids. Both are in really great condition and will clean up nice... no cracks. one contains the screen mesh and both contain the rain trough.
Last edited by jbucago; 03-31-2010 at 07:49 PM.
03-30-2010, 11:53 PM
#2
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
Re: [CA] Stuff For Sale
for got this pic
Oil filter Relocation
Last edited by jbucago; 03-31-2010 at 12:00 AM.
04-01-2010, 10:28 AM
#3
Member
iTrader: (3)
Join Date: Mar 2010
Location: sturgeon bay wisconsin
Posts: 271
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 firebird
Engine: 350
Transmission: 700r4
Axle/Gears: stock
Re: [CA] Stuff For Sale
interested in the blower motor housing was wondering if you would know if it would fit in a 91 firebird if so then i am very interested for i could get rid of my ac box also what would you take for it. shipping to 54235 once we know the shipping then if all goes well we can work on a price thanks
04-01-2010, 11:48 AM
#4
Member
iTrader: (1)
Join Date: Oct 2001
Location: Marshallville, Ohio, USA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Car: 98 Camaro/85 Camaro
Engine: 3.8L/ 355 CI
Transmission: Auto/ TH350
Axle/Gears: 3.23 Posi
Re: [CA] Stuff For Sale
How much are you looking for the MSD box and lower control arm brackets?
04-01-2010, 06:54 PM
#7
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
Re: [CA] Stuff For Sale
interested in the blower motor housing was wondering if you would know if it would fit in a 91 firebird if so then i am very interested for i could get rid of my ac box also what would you take for it. shipping to 54235 once we know the shipping then if all goes well we can work on a price thanks
I wasnt aware of how rare this item is... the F body shop guy by my house offered me 200 for it.. and then i decided to keep it.. that was last year.. well now im trying to get it out of the house... and i would let it go for $140.00... Or if you have anything TBI related to get my 305 TBI above 170 HP i would gladley trade for that.
Here are the prices for shipping to 34691
Overnight = $102.00
Standard - $92.72
2 day = $61.88
3 day = $43.59
4-5 days Ground = $17.50
Trending Topics
04-01-2010, 06:56 PM
#8
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
04-01-2010, 06:58 PM
#9
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
04-01-2010, 07:00 PM
#10
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
04-01-2010, 07:34 PM
#12
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
04-01-2010, 07:45 PM
#14
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
04-01-2010, 09:47 PM
#16
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
04-02-2010, 09:29 AM
#17
Member
iTrader: (3)
Join Date: Mar 2010
Location: sturgeon bay wisconsin
Posts: 271
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 firebird
Engine: 350
Transmission: 700r4
Axle/Gears: stock
Re: [CA] Stuff For Sale
thanks anyway but i just dont have that much and yes i think they are a little rare cause every one that i see for sale sells right away and there is always someone in here lookin for one
04-02-2010, 03:48 PM
#18
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
Re: [CA] Stuff For Sale
some one is comming to look at it today but isnt here yet!!!! craigslist is full of flakes.
04-02-2010, 04:32 PM
#19
Member
iTrader: (3)
Join Date: Mar 2010
Location: sturgeon bay wisconsin
Posts: 271
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 firebird
Engine: 350
Transmission: 700r4
Axle/Gears: stock
Re: [CA] Stuff For Sale
lots of flakes same with ebay and all those guys buyin up **** from garage sales or junk yards and tryin to get a fortune for them. well good luck anyway but all i can probebly do is 40 and i know you arent gonna like that, but the old lady is really touchy about me buyin stuff for the car lol and i just spent a lot on the car today already. sorry man i would take it if i had more money. i dont think you are gonna have a problem sellin it anyway, have a good one
04-02-2010, 05:39 PM
#20
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
Re: [CA] Stuff For Sale
lots of flakes same with ebay and all those guys buyin up **** from garage sales or junk yards and tryin to get a fortune for them. well good luck anyway but all i can probebly do is 40 and i know you arent gonna like that, but the old lady is really touchy about me buyin stuff for the car lol and i just spent a lot on the car today already. sorry man i would take it if i had more money. i dont think you are gonna have a problem sellin it anyway, have a good one
04-02-2010, 05:49 PM
#22
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
04-06-2010, 05:59 PM
#23
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
Re: [CA] Cleaning out Shed
okay guys this stuff is still up for grabs... everything here is for trade.. - have a 89 formula that im trying to make .. TPI.. i have a 7730 ecu on the way to me.. but i need the rest like a harness and what not.. it will be a project for sure but for right now i will be trading this stuff for TBI and TPI stuff... or cash or paypal.
Lemme know
OLD diacom set up and program on floppy disk
1LE Blower motor and housing i hear these are rare.
Brand new Window motors
TPI fuel Rails.. i think there are different years i have 2 of them
TPI throttle body
I made this in school
Power bulge cold air actuator from 82-84 i think... the solenoids are available but i dont know if they work.. these are for cross fire housings. if i am not mistaken these are kinda rare.. but not very usefull, unless you are like me and like rare stuff on your car. i have a working on on my 89 for my TBI with the unit made for carburator. not for sale.. lol but these 2 are for sale or trade ! door lock actuators make good substitute for flapper solenoids. Both are in really great condition and will clean up nice... no cracks. one contains the screen mesh and both contain the rain trough.
for got this pic
Oil filter Relocation
Lemme know
OLD diacom set up and program on floppy disk
1LE Blower motor and housing i hear these are rare.
Brand new Window motors
TPI fuel Rails.. i think there are different years i have 2 of them
TPI throttle body
I made this in school
Power bulge cold air actuator from 82-84 i think... the solenoids are available but i dont know if they work.. these are for cross fire housings. if i am not mistaken these are kinda rare.. but not very usefull, unless you are like me and like rare stuff on your car. i have a working on on my 89 for my TBI with the unit made for carburator. not for sale.. lol but these 2 are for sale or trade ! door lock actuators make good substitute for flapper solenoids. Both are in really great condition and will clean up nice... no cracks. one contains the screen mesh and both contain the rain trough.
for got this pic
Oil filter Relocation
04-06-2010, 07:52 PM
#24
04-06-2010, 07:57 PM
#25
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
Re: [CA] Cleaning out Shed
PM me an offer.. or a trade.
04-06-2010, 08:10 PM
#26
Member
Join Date: Oct 2007
Location: milton ont.
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Car: Blue 84 z28/Cyber 2010ss/rs
Engine: Dart headed, 12:1 355- 510/530 cam
Transmission: TKO 600 Lakewood Bell
Axle/Gears: Richmond 410 Spooled
Re: [CA] Cleaning out Shed
oil relocation kit still around ?
04-29-2010, 07:18 AM
#28
Supreme Member
iTrader: (8)
Join Date: Jul 2001
Location: New Boston, IL, USA
Posts: 3,204
Likes: 0
Received 6 Likes
on
6 Posts
Car: '90 Formula 350
Engine: 383 SBC
Transmission: ProBuilt S/S 700-R4 & ACT 9" Stall
Axle/Gears: 10 bolt 3.23
Re: [CA] Cleaning out Shed
It moves oil filter out of the way of exhaust making it easier to change, makes adding an oil cooler much easier, and/or allows you to run an oversized oil filter if you can't with your oil pan/header combo. Like on mine I can't run the big double sized truck oil filters cause it literally hits off the side of the oil pan.
04-29-2010, 05:51 PM
#30
Member
iTrader: (1)
Join Date: Jan 2006
Location: riverside
Posts: 125
Received 0 Likes
on
0 Posts
Car: 86 iroc,89iroc,98z28
Engine: 305,305,ls1
Transmission: 700r4/4l60e
Axle/Gears: 2.77/3.23
Re: [CA] Cleaning out Shed
how thick is that face for the gauges , what size of gauges fit in there,and how much .
10-15-2010, 05:36 AM
#35
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Sunnyvale CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: Black 1989 Formula Firebird
Engine: 5.0 TBI soon to be LT1
Transmission: 700r4 soon to be T56
Axle/Gears: 3.27
Re: [CA] Cleaning out Shed
Make me an offer and pay for shipping from 95002
Thread
Thread Starter
Forum
Replies
Last Post
sailtexas186548
Engine/Drivetrain/Suspension Parts for Sale
8
02-17-2017 03:07 PM
Darth Mole
Tech / General Engine
2
09-21-2015 09:48 AM