Edelbrock carb and intake
#1
Junior Member
Thread Starter
Join Date: Nov 2007
Location: Poland, ME
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28
Engine: 385
Transmission: T5 (soon to be in pieces)
Axle/Gears: 3.73 POSI Disc
Edelbrock carb and intake
Edelbrock 600 cfm carb electric choke, part number 1406 i believe has probably 100 miles on a recent rebuild $200
Edelbrock torker 2 intake square bore, fits early small block chevy part number 5001 $80
prices are pretty firm would consider selling both for $250
willing to ship at buyers expense
Edelbrock torker 2 intake square bore, fits early small block chevy part number 5001 $80
prices are pretty firm would consider selling both for $250
willing to ship at buyers expense
#7
Junior Member
Thread Starter
Join Date: Nov 2007
Location: Poland, ME
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28
Engine: 385
Transmission: T5 (soon to be in pieces)
Axle/Gears: 3.73 POSI Disc
Re: Edelbrock carb and intake
yes, it will bolt right up, you would just need to do a little tuning for your engine
Trending Topics
#8
#10
Re: Edelbrock carb and intake
#11
Member
iTrader: (7)
Join Date: Jun 2004
Location: Chicago south suburbs
Posts: 489
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 IROC-Z28
Engine: L98(383tpi) modified
Transmission: 700R4 rebuilt
Axle/Gears: 3:73 10bolt rebuilt
Re: Edelbrock carb and intake
I may be interested in this.
My wife has a winter project that shes going to be starting soon for a 1981 TA which currently has a 301 in it. We are going to put in a 350 which I have most the parts for all ready. But we do need a intake and carb. The heads i'm using are edelbrock performers which are ported, would that manifold match up to the heads I have?
My wife has a winter project that shes going to be starting soon for a 1981 TA which currently has a 301 in it. We are going to put in a 350 which I have most the parts for all ready. But we do need a intake and carb. The heads i'm using are edelbrock performers which are ported, would that manifold match up to the heads I have?
#12
Junior Member
Thread Starter
Join Date: Nov 2007
Location: Poland, ME
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28
Engine: 385
Transmission: T5 (soon to be in pieces)
Axle/Gears: 3.73 POSI Disc
Re: Edelbrock carb and intake
sxn: tuning is fairly straight forward, i would recommend doing a search for it on the forums here im sure some one has explained it better than i could.
amouse: im fairly sure it would, check and see if the intake mainfold bolts go into your heads at an angle, or vertically if they go in at an angle it will fit, if they come straight down you will need a vortec style intake
amouse: im fairly sure it would, check and see if the intake mainfold bolts go into your heads at an angle, or vertically if they go in at an angle it will fit, if they come straight down you will need a vortec style intake
Thread
Thread Starter
Forum
Replies
Last Post
BlackphantomZ28
Engine/Drivetrain/Suspension Parts for Sale
0
08-22-2015 01:00 PM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM