[NJ] 1987 Complete Stock TPI Setup
02-16-2012, 10:26 AM
#1
Member
Thread Starter
Join Date: Oct 2010
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: LB9
Transmission: T5
Axle/Gears: 3.70 9 bolt
1987 Complete Stock TPI Setup
Original TPI setup off my 305 IROC. These parts came with the car so I'm selling them as is.
60k miles on these parts:
Stock TPI runners/plenum/throttle body/base (EGR block-off plate)
Stock fuel rails
Stock MAF and relays
Original ignition module and distributor (both still work)
MAT, TPS, IAC motor
ESC module
Parts with about 500 miles:
Fuel Injection Connection rebuilt 19LB injectors (yellow tops) with 9th injector
Coil
Ignition module
Fuel pressure regulator
Coolant temp sensor
A few old pics below, but I'll take new ones today after work:
I also have a fully ported TPI base (85-86 style I believe) that I will sell. I'm asking $250 for everything. If you need an individual part, make me an offer and I'll see what I can do. I do not have a wiring harness for this setup.
~Matt
60k miles on these parts:
Stock TPI runners/plenum/throttle body/base (EGR block-off plate)
Stock fuel rails
Stock MAF and relays
Original ignition module and distributor (both still work)
MAT, TPS, IAC motor
ESC module
Parts with about 500 miles:
Fuel Injection Connection rebuilt 19LB injectors (yellow tops) with 9th injector
Coil
Ignition module
Fuel pressure regulator
Coolant temp sensor
A few old pics below, but I'll take new ones today after work:
I also have a fully ported TPI base (85-86 style I believe) that I will sell. I'm asking $250 for everything. If you need an individual part, make me an offer and I'll see what I can do. I do not have a wiring harness for this setup.
~Matt
Last edited by 88WS-6; 04-18-2012 at 06:02 AM.
02-20-2012, 06:49 AM
#6
Member
Thread Starter
Join Date: Oct 2010
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: LB9
Transmission: T5
Axle/Gears: 3.70 9 bolt
Re: 1987 Complete Stock TPI Setup
The ported intake 14081005 is for 85 or 86 TPI's with the standard head bolt pattern (90 degree)
The other intake is # 10068016 and I'm having trouble matching that part number. This was the stock TPI intake on my 87 305 IROC.
The other intake is # 10068016 and I'm having trouble matching that part number. This was the stock TPI intake on my 87 305 IROC.
Trending Topics
04-18-2012, 02:14 AM
#17
Junior Member
Join Date: Nov 2011
Location: In Alaska, in a igloo
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 camaro/ 78 gmc serria classic
Engine: 2.8 soon to be 350/ 350
Transmission: 700r4/ turbo 350
Axle/Gears: have no clue.
Re: 1987 Complete Stock TPI Setup
ok so 250 dollars for everything you have listed? if so how much shipped to kenai ak 99611?
04-18-2012, 06:02 AM
#18
Member
Thread Starter
Join Date: Oct 2010
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: LB9
Transmission: T5
Axle/Gears: 3.70 9 bolt
Re: 1987 Complete Stock TPI Setup
Yes $250 for everything listed in the first post. Shipping to Alaska will likely be a lot but I will look into it tonight after work.
04-24-2012, 09:08 PM
#20
04-25-2012, 02:27 PM
#21
Senior Member
iTrader: (5)
Join Date: Aug 2010
Location: Wichita Falls, TX
Posts: 916
Likes: 0
Received 8 Likes
on
8 Posts
Car: 91 Firebird,00 c2500,75 Vette
Engine: 3.1 but 350 soon, 350, 350
Transmission: T56 soon
Axle/Gears: stock 3.42 Posi to come
Re: 1987 Complete Stock TPI Setup
If not sold how much for the aluminum distributor cover with the bolts, if you have them. I am also looking for a throttle cable bracket but did not see any. This would be shipped to 76301.
Thank You
Thank You
04-26-2012, 09:58 AM
#22
Member
Thread Starter
Join Date: Oct 2010
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: LB9
Transmission: T5
Axle/Gears: 3.70 9 bolt
Re: 1987 Complete Stock TPI Setup
I don't have a throttle cable bracket. I will check to see if I have the bolts and get back to you about the dist cover.
04-26-2012, 10:37 AM
#23
Senior Member
iTrader: (5)
Join Date: Aug 2010
Location: Wichita Falls, TX
Posts: 916
Likes: 0
Received 8 Likes
on
8 Posts
Car: 91 Firebird,00 c2500,75 Vette
Engine: 3.1 but 350 soon, 350, 350
Transmission: T56 soon
Axle/Gears: stock 3.42 Posi to come
Re: 1987 Complete Stock TPI Setup
Thank You,
I would appreciate that. Let me know either way whatever you decide.
I would appreciate that. Let me know either way whatever you decide.
04-30-2012, 10:50 AM
#24
Member
Thread Starter
Join Date: Oct 2010
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: LB9
Transmission: T5
Axle/Gears: 3.70 9 bolt
Re: 1987 Complete Stock TPI Setup
I'd really like to sell everything all together and I've had some local interest. If in a little while I still have everything, I will consider selling individually and I will let you know.
06-07-2012, 07:01 PM
#29
Junior Member
Join Date: Nov 2011
Location: In Alaska, in a igloo
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 camaro/ 78 gmc serria classic
Engine: 2.8 soon to be 350/ 350
Transmission: 700r4/ turbo 350
Axle/Gears: have no clue.
Re: 1987 Complete Stock TPI Setup
How much for shipping to Kenai Alaska 99611, interested have cash in hand.
06-10-2012, 09:13 PM
#30
Junior Member
Join Date: Sep 2006
Location: Columbus, Oh
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Iroc
Engine: 350 TPI
Transmission: 700R
Axle/Gears: 3:27 posi
Re: 1987 Complete Stock TPI Setup
Just out of curiosity, I see a NAPA part number on the 180 bent hose coming from the base of the throttle body. Would you happen to have the part number of the one you used? I cant locate the part number of the one I ended up using and getting ready to replace it and the other hoses. Thanks for your time.
06-11-2012, 12:26 PM
#31
Member
Thread Starter
Join Date: Oct 2010
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: LB9
Transmission: T5
Axle/Gears: 3.70 9 bolt
Re: 1987 Complete Stock TPI Setup
Just out of curiosity, I see a NAPA part number on the 180 bent hose coming from the base of the throttle body. Would you happen to have the part number of the one you used? I cant locate the part number of the one I ended up using and getting ready to replace it and the other hoses. Thanks for your time.
07-15-2012, 11:44 AM
#36
Junior Member
Re: 1987 Complete Stock TPI Setup
If you still have injectors. Do the injectors work? How much for those and distributor cover shipped to 31909.
07-19-2012, 06:28 AM
#37
Member
Thread Starter
Join Date: Oct 2010
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: LB9
Transmission: T5
Axle/Gears: 3.70 9 bolt
08-22-2012, 11:59 PM
#39
Senior Member
iTrader: (6)
Join Date: Mar 2002
Location: middle TENNESSEE
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc rebuild
Engine: 355 carb'd
Transmission: 5spd
Axle/Gears: 3:08 pos for a while
Re: 1987 Complete Stock TPI Setup
The ported intake 14081005 is for 85 or 86 TPI's with the standard head bolt pattern (90 degree)
shipped price 38501 zip and you take paypal
shipped price 38501 zip and you take paypal
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM
L98GTA87
Engine/Drivetrain/Suspension Wanted
1
08-11-2015 06:55 PM
