FS: Performance Intake & Throttle Body
#1
Want a title? Post!
Thread Starter
iTrader: (1)
Join Date: Dec 2011
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
FS: Performance Intake & Throttle Body
Selling both the intake (#1 below) and the TB (#2 below) for $600 combined plus shipping or separately for the prices shown below. The combination below will fit under a stock C4 Corvette hood with dropped base air filter or a Procharger standard profile carb hat which can be connected to the MAF or directly to the front mounted air filter. I assume it would have no problem fitting under an F-Body hood. Please PM me if interested. Thanks.
1. Edelbrock Victor E intake with Fuel rails. The intake has been ported to match a 1206 intake gasket and the plenum area has been worked to match the throttle body. I installed the intake new in February as a test for about 2 months. Intake and rails sell for over $420 in Summit. Selling for $325 plus shipping
http://www.summitracing.com/parts/EDL-29785/
http://www.summitracing.com/parts/EDL-3630/
2. Accel 1350 CFM carb style billet throttle body with IAC, TPS & throttle bracket. Very little use and in excellent condition. The throttle body sells for over $550 in Summit and the C4 style IAC adapter harness & Throttle bracket sell for an additional $25. Selling all for $325 plus shipping.
http://www.summitracing.com/parts/ACC-74202S3/
1. Edelbrock Victor E intake with Fuel rails. The intake has been ported to match a 1206 intake gasket and the plenum area has been worked to match the throttle body. I installed the intake new in February as a test for about 2 months. Intake and rails sell for over $420 in Summit. Selling for $325 plus shipping
http://www.summitracing.com/parts/EDL-29785/
http://www.summitracing.com/parts/EDL-3630/
2. Accel 1350 CFM carb style billet throttle body with IAC, TPS & throttle bracket. Very little use and in excellent condition. The throttle body sells for over $550 in Summit and the C4 style IAC adapter harness & Throttle bracket sell for an additional $25. Selling all for $325 plus shipping.
http://www.summitracing.com/parts/ACC-74202S3/
Last edited by ralph85; 07-02-2012 at 01:41 PM.
#3
Member
Join Date: Apr 2001
Location: Boyertown, PA
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28
Engine: 91 L98 long block with Pro-jection
Transmission: T5
Axle/Gears: 91 10bolt w/ 3.42s and T2R
Re: FS: Performance Intake & Throttle Body
Why are you removing it? What setup was it planned for? Where are you located?
#4
Want a title? Post!
Thread Starter
iTrader: (1)
Join Date: Dec 2011
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Performance Intake & Throttle Body
I removed it because the super victor & custom made plenum seemed to work slightly better on my application. There is very limited space under a C4 Corvette hood. The front mounted air filter, carb hat and required duct work was a little restrictive in the upper rpms. I think it would have worked better if i could have brought cool air directly into the throttle body. My application is a C4 corvette with a 406 & brodix M2 T1 heads used primarily for drag racing. BTW, the performance difference was minor (less than a tenth) and the Victor E setup drove better on the street. In fact, I'll sell either setup and keep the other........I just don't need both ;o)
I'm in New York and usually race at Etown.
I'm in New York and usually race at Etown.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
Fast355
DFI and ECM
14
12-02-2016 06:33 PM
mdtoren
Tech / General Engine
0
08-16-2015 05:45 PM