for sale 305 TPI injectors LOW time on them
#1
for sale 305 TPI injectors LOW time on them
These were purchased brand new NOT REBUILT. They are delphi/bosche style for a 305 TPI motor, they are 19lb per hour injectors.
They were run in my 1990 corvette for about 6-8 hours and performed excellent. However I need 22lb per hour ones.
!60.00 shipped .... THIS DOES NOT INCLUDE THE FUEL RAIL .... INJECTORS ONLY !!!!!!!!!
HIGHER SHIPPING RATE IF OUTSIDE THE U.S !!!!!!!!!!!!!!!!!!!!!!!!!!
They were run in my 1990 corvette for about 6-8 hours and performed excellent. However I need 22lb per hour ones.
!60.00 shipped .... THIS DOES NOT INCLUDE THE FUEL RAIL .... INJECTORS ONLY !!!!!!!!!
HIGHER SHIPPING RATE IF OUTSIDE THE U.S !!!!!!!!!!!!!!!!!!!!!!!!!!
#2
Re: for sale 305 TPI injectors LOW time on them
These were purchased brand new NOT REBUILT. They are delphi/bosche style for a 305 TPI motor, they are 19lb per hour injectors.
They were run in my 1990 corvette for about 6-8 hours and performed excellent. However I need 22lb per hour ones.
!60.00 shipped .... THIS DOES NOT INCLUDE THE FUEL RAIL .... INJECTORS ONLY !!!!!!!!!
HIGHER SHIPPING RATE IF OUTSIDE THE U.S !!!!!!!!!!!!!!!!!!!!!!!!!!
They were run in my 1990 corvette for about 6-8 hours and performed excellent. However I need 22lb per hour ones.
!60.00 shipped .... THIS DOES NOT INCLUDE THE FUEL RAIL .... INJECTORS ONLY !!!!!!!!!
HIGHER SHIPPING RATE IF OUTSIDE THE U.S !!!!!!!!!!!!!!!!!!!!!!!!!!
#5
Re: for sale 305 TPI injectors LOW time on them
I'm going to pass.
Please read the following from a couple of posts I found on our board for P/N D15708A.Looks like you have what you need? They seem to all agree that they are Lucas not Bosch.Hope this helps.
"Those injectors are actually 87-88 lucas 24lb/ph."
"Ok, I've done lots of reading on the number D1570BA a few say they are 19lb per hr. however the greater majority say they are in fact delphi 24's and flow 23.92lbs per hr. at 43.5 psi ..... it says they are 16.2 ohm injectors."
Please read the following from a couple of posts I found on our board for P/N D15708A.Looks like you have what you need? They seem to all agree that they are Lucas not Bosch.Hope this helps.
"Those injectors are actually 87-88 lucas 24lb/ph."
"Ok, I've done lots of reading on the number D1570BA a few say they are 19lb per hr. however the greater majority say they are in fact delphi 24's and flow 23.92lbs per hr. at 43.5 psi ..... it says they are 16.2 ohm injectors."
#6
Re: for sale 305 TPI injectors LOW time on them
I'm going to pass.
Please read the following from a couple of posts I found on our board for P/N D15708A.Looks like you have what you need? They seem to all agree that they are Lucas not Bosch.Hope this helps.
"Those injectors are actually 87-88 lucas 24lb/ph."
"Ok, I've done lots of reading on the number D1570BA a few say they are 19lb per hr. however the greater majority say they are in fact delphi 24's and flow 23.92lbs per hr. at 43.5 psi ..... it says they are 16.2 ohm injectors."
Please read the following from a couple of posts I found on our board for P/N D15708A.Looks like you have what you need? They seem to all agree that they are Lucas not Bosch.Hope this helps.
"Those injectors are actually 87-88 lucas 24lb/ph."
"Ok, I've done lots of reading on the number D1570BA a few say they are 19lb per hr. however the greater majority say they are in fact delphi 24's and flow 23.92lbs per hr. at 43.5 psi ..... it says they are 16.2 ohm injectors."
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
1
08-25-2015 11:49 PM