[IL] Turn key 383 super ram
07-21-2018, 02:32 PM
#1
Turn key 383 super ram
Up for sale is my turn key 383 super ram motor.
Short block
Old school iron block 4 bolt main
Eagle forged crankshaft 2 pc rear seal
Scat I beam rods
Clevete bearings
Arp bolts
Kieth black forged pistons
Comp cam
242 248 584 579
Pro comp heads ported and polished
193cc 64cc
2.05 intake 1.80 exhaust
Comp cam beehive dual springs 650 lift part #26968
Hyd. Rollor lifters
Flow is intake 262.5 at 600
Exhaust 188 at 600.
Intake
Accel super ram complete
Part # 77131
30 lb injectors
Unported/stock super ram
Bought as complete kit. As you can look up part number
I had this motor built back in 2007.
West tech automotive
Silver lake wisconsin
Norm brandes
Engine has about 8000 miles on it. I know cause its documented.
I tried to list the main parts of the motor and this is still in the car and can drive and hear run.
Complete turn key
All paperwork
Birth certificate
Wire schematics
Wire harness super ram harness integrated into my thirdgen harness
Computer Accel.gen 7
Laptop
Pro key for tuning
This came out of my 1988 thirdgen and is complete.
I had a 700r4 with a 3000 stall behind it. And was a blast.
I now have a t56 in the car.
Never raced spayed or anything else. I built this and it was a cruise night car.
Very stout motor and very reliable. Would go anywhere with it
Im.sure im forgetting a ton of stuff.
Not parting at this time.
Price is $3500 obo.
Thank you
Short block
Old school iron block 4 bolt main
Eagle forged crankshaft 2 pc rear seal
Scat I beam rods
Clevete bearings
Arp bolts
Kieth black forged pistons
Comp cam
242 248 584 579
Pro comp heads ported and polished
193cc 64cc
2.05 intake 1.80 exhaust
Comp cam beehive dual springs 650 lift part #26968
Hyd. Rollor lifters
Flow is intake 262.5 at 600
Exhaust 188 at 600.
Intake
Accel super ram complete
Part # 77131
30 lb injectors
Unported/stock super ram
Bought as complete kit. As you can look up part number
I had this motor built back in 2007.
West tech automotive
Silver lake wisconsin
Norm brandes
Engine has about 8000 miles on it. I know cause its documented.
I tried to list the main parts of the motor and this is still in the car and can drive and hear run.
Complete turn key
All paperwork
Birth certificate
Wire schematics
Wire harness super ram harness integrated into my thirdgen harness
Computer Accel.gen 7
Laptop
Pro key for tuning
This came out of my 1988 thirdgen and is complete.
I had a 700r4 with a 3000 stall behind it. And was a blast.
I now have a t56 in the car.
Never raced spayed or anything else. I built this and it was a cruise night car.
Very stout motor and very reliable. Would go anywhere with it
Im.sure im forgetting a ton of stuff.
Not parting at this time.
Price is $3500 obo.
Thank you
Last edited by 88Convertible; 07-22-2018 at 07:54 AM. Reason: Added information
07-21-2018, 08:01 PM
#5
Re: Turn key 383 super ram
11.1 comp
pump gas 93.
Mustang dyno rear wheel
380 hp. 440 tq
should have dyno sheet in paperwork. Once i find it i will post a pic
Yea this is a good deal. The intake with computer and harness are more than what im asking alone.
thanks
pump gas 93.
Mustang dyno rear wheel
380 hp. 440 tq
should have dyno sheet in paperwork. Once i find it i will post a pic
Yea this is a good deal. The intake with computer and harness are more than what im asking alone.
thanks
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
mypontiac
TPI
5
05-10-2003 09:59 PM
onebadta
TPI
13
12-02-2002 01:31 PM