V8 Engine Mounts Needed!!!
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: Sunny Central Flroida
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: Twin Turbo-Charged, Intercooled SBC
Transmission: Reverse Manual TH400
Axle/Gears: Aftermarket 9-Inch, 3.50 Gearset
V8 Engine Mounts Needed!!!
I am in need of a pair of stock mounts for a V8 engine in a 82-92 F-Body. These are the one that bolt to the engine, not the ones that bolt to the K-Member. The GM part numbers: 334972 or 10213125 (LHS); 14039486 (RHS).
Let me know what you have. PM me or email directly at gta_1@bellsouth.net
Thanks
#4
Member
iTrader: (5)
Join Date: May 2005
Location: Mooresville, NC
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Buick Regal
Engine: 355
Transmission: TH350
Axle/Gears: 4.11
Re: V8 Engine Mounts Needed!!!
There are no engine side "bucket" mounts available through an aftermarket company, that mate with a stock style "clamshell" frame mount.
I manage a NAPA and the only thing offered is the, rubber inserted, "clamshell" style mount. The solid steel "bucket" mounts, that bolt to the engine, are a non-wearable part. That is why they are not produced by DORMAN or any other aftermarket parts producer.
Your best/cheapest option is to go to a local salvage yard and buy a set from them for $15-20
I manage a NAPA and the only thing offered is the, rubber inserted, "clamshell" style mount. The solid steel "bucket" mounts, that bolt to the engine, are a non-wearable part. That is why they are not produced by DORMAN or any other aftermarket parts producer.
Your best/cheapest option is to go to a local salvage yard and buy a set from them for $15-20
#5
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: Sunny Central Flroida
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: Twin Turbo-Charged, Intercooled SBC
Transmission: Reverse Manual TH400
Axle/Gears: Aftermarket 9-Inch, 3.50 Gearset
Re: V8 Engine Mounts Needed!!!
John in RI- I found a set on Saturday, and they should be shipping tomorrow. I 'll let you know if they work as intended. Thank you.
RITTER- Thanks for chiming in, as for some unknown reason there are those that think you can get everything at the local auto parts store. I have an Advance Auto less than 1/2 mile from me, and if they carried the ENGINE MOUNTS, I would not have wasted my time posting this thread.
RITTER- Thanks for chiming in, as for some unknown reason there are those that think you can get everything at the local auto parts store. I have an Advance Auto less than 1/2 mile from me, and if they carried the ENGINE MOUNTS, I would not have wasted my time posting this thread.
#6
Member
iTrader: (5)
Join Date: May 2005
Location: Mooresville, NC
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Buick Regal
Engine: 355
Transmission: TH350
Axle/Gears: 4.11
Re: V8 Engine Mounts Needed!!!
I think I am going to start collecting these mounts, so I have them as soon as somebody is needing a set
Thread
Thread Starter
Forum
Replies
Last Post
Zachattack0925
Tech / General Engine
2
08-12-2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
08-12-2015 09:52 PM