LED sequential tail lights for a Camaro
#1
Member
Thread Starter
Join Date: Sep 2004
Location: Denver, CO
Posts: 113
Received 0 Likes
on
0 Posts
Car: 1986 Camaro
Engine: 2.8
Transmission: T-5
Axle/Gears: 3.42
LED sequential tail lights for a Camaro
I was thinking adding sequential LED tail lights. I am thinking of doing them a little different then others have done. I have the standard tail lights with the black stripe across the middle so I was thinking of finding some sort of short amber LED strip lights and having the work with one of the sequential controllers. I am having having a hard time finding short strip lights that would work unless I come up with at way of covering them some how.
Does anyone have any ideas?
Does anyone have any ideas?
#2
Junior Member
Join Date: Jun 2010
Location: Cleveland, Ohio
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 3.1L
Transmission: 700R4
Axle/Gears: 3.23
Re: LED sequential tail lights for a Camaro
Did you try the led light stripes they sell at autozone and other places similar? I can't find the post now but a guy on here made his own sequential relays using different resistors in line with the tail lights he even had a wire diagram in his post
#3
Senior Member
Re: LED sequential tail lights for a Camaro
this guy i work with used the ones at www.superbrightleds.com
#4
Member
Join Date: Apr 2011
Location: long island ny
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 camaro sc
Engine: lg4 305
Transmission: 700r4
Axle/Gears: 2.73
Re: LED sequential tail lights for a Camaro
ebay has 5 meter rolls that you can cut into the needed lengths.
#5
Supreme Member
Join Date: Jan 2011
Location: Lynden WA
Posts: 1,932
Likes: 0
Received 8 Likes
on
7 Posts
Car: 84 Trans Am, 84 Fiero, 86 944
Engine: 5.0, 2.5, 2.5
Transmission: 5spd
Re: LED sequential tail lights for a Camaro
that was stephen, hessince been banned so idk how to get sts modules now he sold them in sets for pretty cheap and all ya did was splice your harness in and they'd work
#6
Senior Member
iTrader: (1)
Join Date: Jun 2010
Location: San Antonio, TX
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Camaro Berlinetta
Engine: GM crate motor Goodwrench 5.7 350
Transmission: 700R4
Axle/Gears: 3.23
Re: LED sequential tail lights for a Camaro
BigBadLou sells them for $56 shipped. they arn't to hard to install and look great once you install an electronic flasher. I have the Berlinetta which has the single black stripe through the middle as well and im very satisfied with the outcome, if you are interested ill post a video of them in action.
#7
Supreme Member
iTrader: (5)
Join Date: Mar 2011
Location: Central Texas
Posts: 2,893
Likes: 0
Received 4 Likes
on
4 Posts
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: LED sequential tail lights for a Camaro
BigBadLou sells them for $56 shipped. they arn't to hard to install and look great once you install an electronic flasher. I have the Berlinetta which has the single black stripe through the middle as well and im very satisfied with the outcome, if you are interested ill post a video of them in action.
Trending Topics
#8
Senior Member
iTrader: (1)
Join Date: Jun 2010
Location: San Antonio, TX
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Camaro Berlinetta
Engine: GM crate motor Goodwrench 5.7 350
Transmission: 700R4
Axle/Gears: 3.23
Re: LED sequential tail lights for a Camaro
yeah I was gonna say I thought they worked together on those, but I wasn't sure if I was remembering correctly or not. I bought one of Lou's around a month and a half ago and he still had plenty to sell.
#9
Supreme Member
iTrader: (3)
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes
on
4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: LED sequential tail lights for a Camaro
I have plenty STS units built. If anybody wants one, just drop me a PM or post here.
Lou
Lou
#10
Member
Join Date: Apr 2011
Location: La Crosse WI
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 Firebird '85 Firebird
Engine: 305 TPI
Re: LED sequential tail lights for a Camaro
I thought that you had made a video showing them off? I cant seem to find it.
#11
Supreme Member
iTrader: (3)
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes
on
4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: LED sequential tail lights for a Camaro
There are YouTue videos on my STS page.
Videos are courtesy of Stephen whose white GTA has had the original STS unit prototype since 2006.
Videos are courtesy of Stephen whose white GTA has had the original STS unit prototype since 2006.
#12
Senior Member
Join Date: Jun 2011
Location: Melbourne, Australia
Posts: 839
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 IROC Camaro (RHD)
Engine: 350 ci L98 SBC
Transmission: T700
Axle/Gears: 9 bolt BW, Disk, Posi-traction
Re: LED sequential tail lights for a Camaro
@Lou, I's like to know more about your STS for a Camaro?
#13
Supreme Member
iTrader: (3)
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes
on
4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: LED sequential tail lights for a Camaro
I would like to avoid littering this thread so here is an STS thread where we discuss installation even on Camaro models:
https://www.thirdgen.org/forums/elec...als-batch.html
Lou
https://www.thirdgen.org/forums/elec...als-batch.html
Lou
#15
Supreme Member
Join Date: Jan 2011
Location: Lynden WA
Posts: 1,932
Likes: 0
Received 8 Likes
on
7 Posts
Car: 84 Trans Am, 84 Fiero, 86 944
Engine: 5.0, 2.5, 2.5
Transmission: 5spd
Re: LED sequential tail lights for a Camaro
there is a company making stock replacement style led bulbs we sell them at my az store, wouldn't the aforementioned module for the sts work with new stlye led bulbs just fine, i'm not wiring expert but it should no?
#16
Supreme Member
iTrader: (1)
Join Date: Oct 2005
Location: Glen Park, NY
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: TPIS II Supercharged w/Nitrous
Transmission: 700R4 Probuilt
Axle/Gears: 3:73 Richmond 12 Bolt
Re: LED sequential tail lights for a Camaro
I would be very interested to see a good video on someone who has installed them into their 3rd gen.. I think it can be done, but would like to know how they mounted their additional brake bulbs or set it up.. I have seen some of the new mustangs do it and I want it..
#17
Member
Thread Starter
Join Date: Sep 2004
Location: Denver, CO
Posts: 113
Received 0 Likes
on
0 Posts
Car: 1986 Camaro
Engine: 2.8
Transmission: T-5
Axle/Gears: 3.42
Re: LED sequential tail lights for a Camaro
I am looking for a way of doing LED lights in addition to the stock lights which I would keep and possibly change the bulbs to LED. So the 2 ways I'm thinking of doing this one is to find short strip lights that have a finished look and mount flat or the other way is to use the strips of LED's that would stick to the top of the stock housing and shine to the back so it would fill the gap between the hatch and the lights. Each way would have have 3 on each side to do the sequential lights, plus maybe a red section that would work with the brake light.
Right now I'm just doing some planning and research, it will be a little while before I have the cash flow to be spending on the Camaro.
Right now I'm just doing some planning and research, it will be a little while before I have the cash flow to be spending on the Camaro.
#18
Senior Member
iTrader: (1)
Join Date: Jun 2010
Location: San Antonio, TX
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Camaro Berlinetta
Engine: GM crate motor Goodwrench 5.7 350
Transmission: 700R4
Axle/Gears: 3.23
Re: LED sequential tail lights for a Camaro
I am looking for a way of doing LED lights in addition to the stock lights which I would keep and possibly change the bulbs to LED. So the 2 ways I'm thinking of doing this one is to find short strip lights that have a finished look and mount flat or the other way is to use the strips of LED's that would stick to the top of the stock housing and shine to the back so it would fill the gap between the hatch and the lights. Each way would have have 3 on each side to do the sequential lights, plus maybe a red section that would work with the brake light.
Right now I'm just doing some planning and research, it will be a little while before I have the cash flow to be spending on the Camaro.
Right now I'm just doing some planning and research, it will be a little while before I have the cash flow to be spending on the Camaro.
#19
Member
Thread Starter
Join Date: Sep 2004
Location: Denver, CO
Posts: 113
Received 0 Likes
on
0 Posts
Car: 1986 Camaro
Engine: 2.8
Transmission: T-5
Axle/Gears: 3.42
Re: LED sequential tail lights for a Camaro
I want to keep it close to stock look so it wouldn't work well to make those sequential. I haven't looked at those strips meant for trucks, but my first thought is that those are meant to mount in a "hidden" location and they are red and I was wanting the strip to be amber for the turn signal, but I wouldn't mind having part of it being red to supplement the stock brake light.
#20
Senior Member
iTrader: (1)
Join Date: Jun 2010
Location: San Antonio, TX
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Camaro Berlinetta
Engine: GM crate motor Goodwrench 5.7 350
Transmission: 700R4
Axle/Gears: 3.23
Re: LED sequential tail lights for a Camaro
I want to keep it close to stock look so it wouldn't work well to make those sequential. I haven't looked at those strips meant for trucks, but my first thought is that those are meant to mount in a "hidden" location and they are red and I was wanting the strip to be amber for the turn signal, but I wouldn't mind having part of it being red to supplement the stock brake light.
#21
Member
iTrader: (2)
Join Date: May 2006
Location: Center Line, Michigan
Posts: 205
Received 0 Likes
on
0 Posts
Car: 88 Iroc
Engine: 383
Transmission: T56
Axle/Gears: 3.43
Re: LED sequential tail lights for a Camaro
If it helps I know aguy that can take your tail lights and fully convert them to led plug and play pm me for more info
#23
Supreme Member
iTrader: (1)
Join Date: Oct 2005
Location: Glen Park, NY
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: TPIS II Supercharged w/Nitrous
Transmission: 700R4 Probuilt
Axle/Gears: 3:73 Richmond 12 Bolt
Re: LED sequential tail lights for a Camaro
I just purchased mine and they are sequential.. I haven't got them installed am working on it now.
https://www.classicindustries.com/search?q=500889
Currently working on website but will upload pics
https://www.classicindustries.com/search?q=500889
Currently working on website but will upload pics
#24
Junior Member
Join Date: Apr 2010
Location: Cape Coral, Fl.
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC Z
Re: LED sequential tail lights for a Camaro
If you want to just replace your factory bulbs with led's go here and type in your car make model and year and it will give you led bulbs numbers for every light on your car.
www.superbrightleds.com
www.superbrightleds.com
Thread
Thread Starter
Forum
Replies
Last Post