crazy82

iTrader: (1)

i bought one of these panels from summit, it's to short and the holes don't line up. sent it back and summit is gonna send another one . just wondering if anyone ran into this, i dont wanna send the second one back .

crazy82

iTrader: (1)

here is a couple of pictures

86Z

iTrader: (4)

did you test fit it to the dash? the dash is not square...

crazy82

iTrader: (1)

yeah i had all the guages in it if i screwed the top to middle holes which are the only ones that would fit it was about a 1/8 inch smaller on both sides if i screwed on the bottom corner in on one side nothing lined up, for 124 dollars it should fit perfect

crazy82

iTrader: (1)

well got another one from summit today, was the same did not fit at all called summit they gave me the covans number called them. all i can say is they are complete Aholes. he told me he installed hundreds of them (bullshit). there must be something different with the 82 dash. he basically told me you bought it from summit so f==k off . and offered no help as to what could be the problem ,DO NOT WASTE YOUR MONEY on this piece of sh-t plastic make your own as i did.

1ADan

iTrader: (4)

sorry to hear the bad luck. i know the 82-83 dashes have some subtle differences from the 84-90 (or was it 89?), maybe the gauge cluster is one of them. Never had that early of a 3rd gen myself, so haven't been able to compare side by side

crazy82

iTrader: (1)

thats what i told the guy from covans, 82 is different he told no he installed hundreds of them i bet he never saw an 82 83 dash . anyway he is a pompus A-- .

ZZ3 Z28

Wow that bl*ws. You go do something that makes your car look a little different and you wind up getting hosed. I was looking at these replacement cluster panels and after pricing them out with some decent Auto Meter gauges the cost was over 9 hundred $$$. Way too much bread for me. So I just replaced all the bulbs with super brights, cleaned up the panel and spray painted the metal frame bright silver so the gauges pop. Looks better than new now.

86Z

iTrader: (4)

except the factory gauges are inaccurate...

ZZ3 Z28

Are you talking my gauges or any factory gauge?

86Z

iTrader: (4)

any factory gauge. if they even work.