89fbrestor

anybody know of some good turbo headers that will fit our engine bay?

BADASS91B4C

ever find any?

cprmn14

iTrader: (3)

flip over the f-body manifolds. perfect budget header

Orr89RocZ

iTrader: (20)

STainless works makes a front forward set. about 800-1000 a set

They have sbc ones and lsx ones and both should fit the bay. Then put turbos behind headlights or run a single up front somewhere

BADASS91B4C

this looks like it might fit
http://www.shop.trickperformanceprod...o-Manfiold.htm

BADASS91B4C

will that clear the hood?

Orr89RocZ

iTrader: (20)

My buddy ran a similar setup as that, fabbed out of mild steel. Made 700 whp on a gm 4.8 truck motor with pt88 turbo

Street Lethal

iTrader: (16)

Yes, just angle the turbo flanges correctly when you weld them on the manifolds. Heat up the manifolds and weld them, do not braze them...

NemeSS-TyranT

iTrader: (1)

I made a 98-99 fbody work on the driver side flipped,triangle cut off and vband welded on.
Pass side used truck manifold flipped with triangle cut off and vband welded on.
Worked great with tc78 turbo. The turbo was in the area where the rad overflow tank goes. The manifolds cleared the mounts and everything else.
No ac

ihatemustangs

iTrader: (3)

I had a set made, and a crossover. Look up my name on here, its all for sale

88blackiroc

iTrader: (1)

I'd love to see some pictures if you have any?
How did the fbody manifold fit on the driver side? I know the truck one goes right through the gear box if not mistaken.

NemeSS-TyranT

iTrader: (1)

Yes, the truck manifold crashes in the gear box. The camaro can clear with the triangle flange still, but depends on the mounts used. I used some of the sbc/ls swap 50$ 3/8 plate adapters. They worked fine. But wanted better sealing and used vbands also from ebay. 2.5 crossover, 38mm 2bolt wg, tc78, hks bov.
Thr pass side used a cast iron truck manifold. I do have pictures on my other pc. I eill dig em up. I used the early stamped 98-99 manifold. Although the cast iron 00-02 should work also. Since the shape is very similar.

89fbrestor

i ended up doing this. i know its not pretty but a couple hours with grinder... or days and i'll be happy with them lol 1 3/4 primaries to a 3 1/2 collector. aside from having a cheap flux core welder, i think for my first header build they came out ok.

xpndbl3

iTrader: (5)

pics pics pics!

88blackiroc

iTrader: (1)

Bumpppp for pics!!!!!