joe2844

ok guys jus bought a nitrous kit. got everything installed except the micro switch. can you guys post some pics of how you mounted it so that its sturdy and reliable?? the instructions weren't so clear on how to do so. thanks!!



oh and where did you guys mount your bottles??

Drew

iTrader: (58)

I spent about an hour looking at the supplied bracket, and then I went down to the hardware store and picked up a piece of aluminum angle. I drilled one hole in the angle and put it under one of the throttle body bolts. Then I cut another rectangle of aluminum and mounted the switch to it. Finally I bolted that piece to the angle. It took a little cutting, grinding, and drilling, but it worked.

Sorry no pics, it's been a few years and at the time I wasn't really documenting.

Edit, found one of my bottle mount. lol

joe2844

thought id show ya what i ended up doin. carb stud works great.

89ROC-Z

iTrader: (7)

if you ever get a controller alot of them have WOT tps switches already in the box, just tap into the blue tps wire and read voltage at WOT

brandoz28

iTrader: (1)

i actually put mine under the dash and the top of the pedal hits it when you go WOT

Orr89RocZ

iTrader: (20)

I used the HSW (harris speed works) LT1 throttle body bracket with switch. Its like 20 bucks and bolts to the bottom TB screw on TPI/LT1 style TB's. My holley throttle body wouldnt trigger the switch with the throttle linkage lever so i drilled a hole in the lever arm, and put a small screw so that it would trigger the switch at WOT.

91B2L

I've got their bracket, solid made. www.jimmy-jams.com

joe2844

nice i like that jimmy-jams setup. bracket and the ashtray/shifter switch plate are going to be in my posession soon

brandoz28

iTrader: (1)

this one is a little cleaner IMO
http://www.nitrousoutlet.com/catalog...1&product=3448