TDS Lower Chassis Brace
#1
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
TDS Lower Chassis Brace
Have heard Lon at TDS is fabricating a lower chassis brace that will be available through the TDS site. He has told me so himself. This brace would be similiar to the KB brace but better. And obviously the customer service would be better. Also he will probably have pictures of it installed and will be able to ansewer all of our questions, ulike KB. I know everybody wants one of these braces but the KB ones are too expensive and there is not info/install pictures of them anywhere on the net. Personally that is why I am not buying the KB one. I will not fork over money for something i am unsure about. Either will anybody else it seems.
The question of this post is How many of you would purchase a lower chassis brace from TDS if it were availableand cost about the same as their wonder bar; 50 bucks? (providing there is info on installations, pictures,powdercoating, and info of the benefits of having one).
Please reply to this post as follows
either
A.) I would most likely purchase one if it met the conditions above.
or
B.) I probably would not purchase one one even if it met the condions above.
please post a reply if you visit this post as I am hoping to relay a message to Lon at TDS about how much interest there is in this brace. Maybe he'll complete it faster if he knows all of us would buy one.
ive enclosed a picture of a lower chassis brace that one of our thirdgen members has created himself so people who are unaware what this brace is can see 1st hand where it goes and what it is.
The question of this post is How many of you would purchase a lower chassis brace from TDS if it were availableand cost about the same as their wonder bar; 50 bucks? (providing there is info on installations, pictures,powdercoating, and info of the benefits of having one).
Please reply to this post as follows
either
A.) I would most likely purchase one if it met the conditions above.
or
B.) I probably would not purchase one one even if it met the condions above.
please post a reply if you visit this post as I am hoping to relay a message to Lon at TDS about how much interest there is in this brace. Maybe he'll complete it faster if he knows all of us would buy one.
ive enclosed a picture of a lower chassis brace that one of our thirdgen members has created himself so people who are unaware what this brace is can see 1st hand where it goes and what it is.
#3
Supreme Member
iTrader: (2)
Join Date: Jul 2003
Location: Dallas, TX area
Posts: 3,205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
A.) I would most likely purchase one if it met the conditions above.
#4
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
removable?
Not sure if it will be removable......probably though if you unbolt it. (see the picture above)
#6
Moderator
iTrader: (2)
Hang on folks. I'm aware of the interest in such a brace. Heck, I want one for my cars as well. Yes it is on my "Future Products List" along with a lot of other items. However, at this point you're REALLY putting the cart before the horse. The concept of the brace exists only in my head. No CAD work has been done, nor have I taken any preliminary measurements, no prototype constructed, etc.
I don't want everyone thinking something is in the works, because it isn't. At this point I can't commit to any time-frame or pricing. There are several other "Future Products" that have further developement into them, yet they still haven't been released for one reason or another. I'll close the discussion by saying that the product does look like a good fit for TDS. Ii look forward to your partonage if the product does make it to the market place. I appreciate your kind words and support for Top-Down Solutions products.
Thanks,
Lon Salgren
Top-Down Solutions
I don't want everyone thinking something is in the works, because it isn't. At this point I can't commit to any time-frame or pricing. There are several other "Future Products" that have further developement into them, yet they still haven't been released for one reason or another. I'll close the discussion by saying that the product does look like a good fit for TDS. Ii look forward to your partonage if the product does make it to the market place. I appreciate your kind words and support for Top-Down Solutions products.
Thanks,
Lon Salgren
Top-Down Solutions
#7
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
Sorry Lon
I thought I read in another post that you were working on one and that it would be available in a while. Guess i misunderstood what you posted, or you posted inaccuate info. Either one I am sorry.
New question of this post is.........if one of our sponsers made a lower chassis brace how many people would be interested in it? Follow the guidlines that I first posted for your replys. I am again doing this to show our sponsers how much of a demand there is for these braces. If you visit this thread please post a reply. Only company that currently makes these are KB. From what i have heard also, the KB ones are a bad design........now if one of our sponsers would make one, obviously it would rule and theyd make hella $$$$ from us folks on thirdgen........right?
Post away
Thanks for your replys
New question of this post is.........if one of our sponsers made a lower chassis brace how many people would be interested in it? Follow the guidlines that I first posted for your replys. I am again doing this to show our sponsers how much of a demand there is for these braces. If you visit this thread please post a reply. Only company that currently makes these are KB. From what i have heard also, the KB ones are a bad design........now if one of our sponsers would make one, obviously it would rule and theyd make hella $$$$ from us folks on thirdgen........right?
Post away
Thanks for your replys
Trending Topics
#8
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
To Lon
this is the link in third gen that I read of yours that said you were in the prossess of making a lower chasis brace.....
take a look
https://www.thirdgen.org/techbb2/sho...ghlight=Lonsal
sorry again if i misunderstood I just want a lower chassis brace, not from KB, so bad i can taste it.
take a look
https://www.thirdgen.org/techbb2/sho...ghlight=Lonsal
sorry again if i misunderstood I just want a lower chassis brace, not from KB, so bad i can taste it.
#9
Moderator
iTrader: (2)
Steering Brace, yes. Lower chassis support, no. The whole misunderstanding goes back to the confusion over what KB's product IS. KB's vendor has it listed and described as a steering brace. I can sell you a Steering Brace today. If you want a Lower Chassis Support you'll have to wait.
Sorry for any confusion.
Lon
Sorry for any confusion.
Lon
#10
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
steering brace
already have ordered one from you should be here in a few days. Yeah KBs product causes alot of confusion. Do you know for a fact that the KB one connects the SF's together infront of the oil pan?
thanks Lon
thanks Lon
#12
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
keep the votes comin
if anyone our sponsors are thinkin about makin one maybe thislll make them make it faster (if there is alot of interest)
#15
Supreme Member
Join Date: May 2001
Location: Kars, Ontario, Canada
Posts: 1,261
Received 68 Likes
on
58 Posts
Car: '87 FIREGOOSE!!!!
Well, first off I have to say TDS is a SUPER company, Lon is EXCELLENT to deal with. Also Ryan at UMI. Thumbs up to both.
Second, Kenny Brown closed the doors. You can't get any more KB products unless a vender has some in stock somewhere. BUT, ANYONE who says Kenny Brown products aren't any good are just ignorant and do not know what they are talking about. Kenny Brown made A+ products. Some of the best.
I have the KB lower chassis brace. Is it a nice piece? You bet. Does it work? Who knows, it's hard to feel a difference if your not using the car to the edge on a track, but on a street like most of us. Was it overpriced? Maybe a bit, but I think alot of the stuff for these cars is overpriced really. (just look at the price of LS products VS what gain you get. = BARGAN)
It doesn't tie the subframe connectors togeather (I have Mac sfc), but it is another chassis support. One thing you can trust, Kenny Brown was a company that did it's homework, so the product no doubt does make a difference. BUT, a difference most of us won't ever feel because alot of us street drive them 99.9% of the cars life.
In closing, if Lon choses to make one, great, buy it if your in the mood. If one isn't made for awhile, don't worry too much, just buy a good set of sfc and a stb, and your doing just fine.
Second, Kenny Brown closed the doors. You can't get any more KB products unless a vender has some in stock somewhere. BUT, ANYONE who says Kenny Brown products aren't any good are just ignorant and do not know what they are talking about. Kenny Brown made A+ products. Some of the best.
I have the KB lower chassis brace. Is it a nice piece? You bet. Does it work? Who knows, it's hard to feel a difference if your not using the car to the edge on a track, but on a street like most of us. Was it overpriced? Maybe a bit, but I think alot of the stuff for these cars is overpriced really. (just look at the price of LS products VS what gain you get. = BARGAN)
It doesn't tie the subframe connectors togeather (I have Mac sfc), but it is another chassis support. One thing you can trust, Kenny Brown was a company that did it's homework, so the product no doubt does make a difference. BUT, a difference most of us won't ever feel because alot of us street drive them 99.9% of the cars life.
In closing, if Lon choses to make one, great, buy it if your in the mood. If one isn't made for awhile, don't worry too much, just buy a good set of sfc and a stb, and your doing just fine.
#16
Member
Join Date: Jan 2006
Location: Central Alberta,Canada
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Iroc Vert/ 1980 Z28
Engine: 305 TPI/ 350
Transmission: 700R4/ TH350
Axle/Gears: 2.73posi/ 3.08 Open
How does it differ from the "wonderbar"? Which I already have from LON.
#17
TGO Supporter
iTrader: (12)
Join Date: Jun 2002
Location: AR
Posts: 6,819
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Camaro RS Vert
Engine: 350 S-TPI
Transmission: T5
Axle/Gears: GU5/G80/J65
your wonderbar goes up front under the swaybar.
This brace would go between the engine and trans, and it would help keep the control arms more square. (almost like another transmission brace, but goes more forward, and nothing sits on it). Look at the picture, it looks quite self explanatory to me.
#18
Senior Member
iTrader: (2)
Join Date: Feb 2006
Location: Wilmington,NC
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 trans am
Engine: 305
Transmission: T5
Axle/Gears: 3.42 SLP rear
Most likely like these.
These are on the infamous Japanese Carbon Fiber Hood Camaro.
These are on the infamous Japanese Carbon Fiber Hood Camaro.
Last edited by soultron; 01-31-2007 at 07:27 AM. Reason: link
Thread
Thread Starter
Forum
Replies
Last Post
Chad Speier
Engine/Drivetrain/Suspension Parts for Sale
3
09-24-2015 12:32 PM