Eibach Prokit install and so far very Happy
#1
Member
Thread Starter
Join Date: May 2003
Location: Enterprise, Alabama
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90 RS
Engine: LO3
Eibach Prokit install and so far very Happy
I installed my new prokit springs and am very happy with them. They drop the car approx 1" which is what I wanted and they handle much better. Although the ride is harder (expected) it's by no means punishing like the Suspension Technique springs I had previous. They drop the car approx 2" and the ride was unbearable. That's when I went back to the original springs. Prokit gets the thumbs up from me Pictures before and after
#3
Member
Join Date: Oct 2003
Location: The Modified Side
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Camaro
Engine: Modified 350
Transmission: B&M 700r4
Originally Posted by Tony90RS
I installed my new prokit springs and am very happy with them. They drop the car approx 1" which is what I wanted and they handle much better. Although the ride is harder (expected) it's by no means punishing like the Suspension Technique springs I had previous. They drop the car approx 2" and the ride was unbearable. That's when I went back to the original springs. Prokit gets the thumbs up from me Pictures before and after
Got a question for ya what size rims are you running, look like 17 inch rims and If you could measure your ground to fender lip front and back that would be great..thax
#4
Member
Thread Starter
Join Date: May 2003
Location: Enterprise, Alabama
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90 RS
Engine: LO3
Get you guys some answers tomorrow
I believe I have a pic somewhere with the suspension tech springs, I post soon, to the other question, I'm running 17X8 with 245/45 front and 275/40 rear. I get the measurement tomorrow as it is late night here in Germany.
#5
Member
Thread Starter
Join Date: May 2003
Location: Enterprise, Alabama
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90 RS
Engine: LO3
answers here
JTZ28,, here is a pic when I had the Suspension Technique Springs on. Notice how there is almost no room for the suspension to "spring". I could not push down on the front fender to get any spring back,, Terrible ride. With the Prokit I get some spring and the ride is much better, looks good, and I can ride over most dips and bumps without scraping.
black88cam- I did the measurements and came out with
front - 7/8 inch
rear - 1 7/8 inch from lip to tire. Hope this helps
black88cam- I did the measurements and came out with
front - 7/8 inch
rear - 1 7/8 inch from lip to tire. Hope this helps
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post