Big Problem Help Me Out
#1
Member
Thread Starter
Join Date: Mar 2000
Location: Pa
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Big Problem Help Me Out
Today I was going to change my thermostat and the one bolt was not coming out and I got it to start turning and then it snapped into 2 and is now flush with the intake, my car is overheating badly now and smoking, smoke is coming into the cabin of the car as well. Any suggestions?
#2
Supreme Member
iTrader: (1)
Join Date: Jul 2001
Location: San Jose, CA
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.23
u can buy a "Easy Out" kit from Kragen or somewhere like that, drill a hole in the middle of the stud, tap the correct size easy out bit into the hole, and with a wrench, back it out. Me and my friend had to do this when we broke off the fuel filter thread in the carb for his 67 Mustang.
Trending Topics
#9
Supreme Member
iTrader: (1)
Join Date: Jul 2001
Location: San Jose, CA
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.23
go to summit racing's website www.summitracing.com , they have everything you need, if u type in the part number and click on the link that is associated with the intake, there is another link that lets you know "suggested parts", edelbrock has some intake bolts that have a cadnium finish and match the intake pretty well.
Thread
Thread Starter
Forum
Replies
Last Post
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
09-01-2015 04:32 PM