pics of accessory brackets for 461 heads
#1
Supreme Member
Thread Starter
Join Date: Oct 2001
Location: Ailsa Craig, Ontario, Canada
Posts: 1,761
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Trans Am
Engine: 350
Transmission: 700r4
pics of accessory brackets for 461 heads
i have seen this question asked alot around here: "how do you run accessory on the double hump heads that dont have accessory bolt holes?"
well, here are some pics of how i did it. i have had the engine setup like this for more than a year. it ahs had 40+ trips down the 1/4 (best so far is 13.87, with 3.23s and an open diff, and 2.3 or geatre 60fts. i now have 4.11s and posi, but no times yet). this has never thrown a belt yet.
now, i am by no means recommmending this setup, as we all know there are much better heads than old double humps and having heads with accessory bolt holes is easier and better. i just thought i would post what has worked for me. please feel free to comment, criticize, or call me a complete moron.
thanks
well, here are some pics of how i did it. i have had the engine setup like this for more than a year. it ahs had 40+ trips down the 1/4 (best so far is 13.87, with 3.23s and an open diff, and 2.3 or geatre 60fts. i now have 4.11s and posi, but no times yet). this has never thrown a belt yet.
now, i am by no means recommmending this setup, as we all know there are much better heads than old double humps and having heads with accessory bolt holes is easier and better. i just thought i would post what has worked for me. please feel free to comment, criticize, or call me a complete moron.
thanks
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
01-09-2020 08:29 PM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM