lt4 springs on l98 vette heads
#1
Junior Member
Thread Starter
Join Date: Jun 2002
Location: Michigan
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 gmc 1500
Engine: 496
lt4 springs on l98 vette heads
Im wondering if the shims used for the lt4 springs will correctly fit around the guide on a pair of aluminum L98 heads
Do the guides need to be cut down to clear .525" lift on these?
thanks
Do the guides need to be cut down to clear .525" lift on these?
thanks
#3
Junior Member
Thread Starter
Join Date: Jun 2002
Location: Michigan
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 gmc 1500
Engine: 496
Sorry i should have been more specific. Im not talking about just the flat shims im talking about these
http://sdpc2000.com/cart.asp?action=...d=962&pid=8338
so will that shim fit a aluminum l98 head?
http://sdpc2000.com/cart.asp?action=...d=962&pid=8338
so will that shim fit a aluminum l98 head?
Thread
Thread Starter
Forum
Replies
Last Post
1988iroc350tpi
Tech / General Engine
8
08-14-2015 07:52 PM