Push Starting?
06-29-2007, 09:34 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2007
Location: NC
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS
Engine: lO3
Transmission: T5
Push Starting?
Is there any reason why you can't push start our cars? Like some computer protection or something.
My car wouldn't start today. Wouldn't even crank. Battery was charged an good. Lights on dash come on. I tried rolling it and dumping the clutch to push start it but it wouldn't fire.
I was thinking it was the starter, but if it was the starter I should have been able to push start it, right?
My Car: 1992 Camaro RS, LO3 TBI with T5
My car wouldn't start today. Wouldn't even crank. Battery was charged an good. Lights on dash come on. I tried rolling it and dumping the clutch to push start it but it wouldn't fire.
I was thinking it was the starter, but if it was the starter I should have been able to push start it, right?
My Car: 1992 Camaro RS, LO3 TBI with T5
06-29-2007, 09:52 PM
#2
Member
Join Date: Oct 2005
Location: califorina
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 i roc-z28
Engine: 350 tpi l98
Transmission: 700r4
Re: Push Starting?
i whould put a dollar its your coil. mine did that twice to me and both times it was a dead coil. test the coil and you ingination mod
06-30-2007, 01:07 AM
#3
Supreme Member
Join Date: Oct 2006
Posts: 1,974
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS
Engine: 350 vortec
Transmission: T-5
Axle/Gears: not the best not the worst
Re: Push Starting?
no if the starter wouldnt turn the engine then it isnt the coil... now it could be a few things but i am guessing VATS or a bad battery connection or ground.... NOT A COIL
06-30-2007, 01:17 PM
#4
Junior Member
Thread Starter
Join Date: Feb 2007
Location: NC
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS
Engine: lO3
Transmission: T5
Re: Push Starting?
Hmmm... I thinking it might be the VATS system.
So just to verify, I could push start my car if it was working right?
So just to verify, I could push start my car if it was working right?
06-30-2007, 01:35 PM
#5
Senior Member
Join Date: Sep 2005
Location: Middleboro, MA
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac trans am/gta
Engine: 350
Transmission: 700r4
Axle/Gears: 3.23's
Re: Push Starting?
vats doesn't inhibit the starter, not to my knowledge it just kills your injectors, fix your starter issue
06-30-2007, 03:17 PM
#6
Supreme Member
iTrader: (1)
Join Date: May 2004
Location: houston
Posts: 2,262
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83 POS monte carlo 2015 chevy P/U
Engine: 92 5.7 tpi 5.3
Transmission: 700r4 6L60E
Axle/Gears: 2.42 too high
Re: Push Starting?
my books show a VATS starter enable relay for 88 & newer.
these 2 links should help if it is a VATS problem
https://www.thirdgen.org/vats
https://www.thirdgen.org/vats_passkey_system
these 2 links should help if it is a VATS problem
https://www.thirdgen.org/vats
https://www.thirdgen.org/vats_passkey_system
Trending Topics
06-30-2007, 04:10 PM
#8
Junior Member
Thread Starter
Join Date: Feb 2007
Location: NC
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS
Engine: lO3
Transmission: T5
Re: Push Starting?
Thanks for all the replies, I fixed it.
It was the VATS system. Must be a wire broken in the column, I just soldered a resister under the dash. Problem solved.
And yes, you can push start the car, but VATS disables the fuel system without the correct resistance.
It was the VATS system. Must be a wire broken in the column, I just soldered a resister under the dash. Problem solved.
And yes, you can push start the car, but VATS disables the fuel system without the correct resistance.
Thread
Thread Starter
Forum
Replies
Last Post
