Oil out the dipstick tube
#1
Supreme Member
Thread Starter
Join Date: Mar 2005
Location: Benzie, MI
Posts: 1,665
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Oil out the dipstick tube
My buddy just picked up a 305 tbi and it pukes oil out the top of the dipstick tube. Compression is 180-205. What else can we check?
#2
Supreme Member
Re: Oil out the dipstick tube
Check the PCV system. Unless it's working properly, cylinder blowby will increase crankcase pressure to the point where oil will be forced out anyplace it can.
Nice compression pressure by the way. Bit of a spread but it's good to see 200 psi.
Nice compression pressure by the way. Bit of a spread but it's good to see 200 psi.
#3
Supreme Member
Thread Starter
Join Date: Mar 2005
Location: Benzie, MI
Posts: 1,665
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Re: Oil out the dipstick tube
There's a new breather on the passenger side, and a new pcv valve on the driver's.
#4
Supreme Member
Re: Oil out the dipstick tube
Other than checking that the PCV is working correctly (despite the presence of the breather and the valve) my only other suggestion is a leak down test. That'll determine if that nice high compression you have is overwhelming the PCV and causing your problem.
Thread
Thread Starter
Forum
Replies
Last Post
tyeo098
Tech / General Engine
38
11-30-2015 06:27 PM
codeysabatini
Engine/Drivetrain/Suspension Parts for Sale
5
11-10-2015 04:07 PM