Interior Turn Signal Lights Stay On!!
#1
Member
Thread Starter
Join Date: Feb 2003
Location: Wasco, CA
Posts: 262
Likes: 0
Received 1 Like
on
1 Post
Car: Camaro
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: Borg Warner/ 2.77
Interior Turn Signal Lights Stay On!!
Just installed HID's and replaced the bumper turn signal lights with LED's but now my interior turn signal indicator lights remain lit when the light switch is on???
#3
Member
Join Date: Aug 2008
Location: SW Ohio
Posts: 394
Likes: 0
Received 2 Likes
on
1 Post
Car: 1989 IROC-Z28
Engine: L98 - 350 TPI
Transmission: MD8 - 700R4
Axle/Gears: GH3/G80 - 2.77 POSI
That generally happens when you have a burned out bulb. Since you just did lighting work, as said above, check all your connections. Also, when you click the signal on, it stays lit inside, correct? Check the back. It should stay lit as well. Then check the front, are the signals on and staying lit? If so, all the bulbs are fine and it's a wiring issue....
#4
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,051
Received 1,672 Likes
on
1,269 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Interior Turn Signal Lights Stay On!!
That generally happens when you put in LEDs (which draw ALOT less current than incandescent bulbs) but don't put in the right flasher for them.
You just need to get the right flasher.
Not a wiring issue. Don't get out your dykes.
You just need to get the right flasher.
Not a wiring issue. Don't get out your dykes.
#6
Member
Thread Starter
Join Date: Feb 2003
Location: Wasco, CA
Posts: 262
Likes: 0
Received 1 Like
on
1 Post
Car: Camaro
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: Borg Warner/ 2.77
Re: Interior Turn Signal Lights Stay On!!
I replaced the flasher with an electronic one, my bumper lights flash like they need to and the HID's turn on with no problem. But the interior lights still stay on. WTf!
Thread
Thread Starter
Forum
Replies
Last Post