Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Blown head gasket??

Thread Tools
 
Search this Thread
 
Old 03-01-2016, 12:57 PM
  #1  
Member
Thread Starter
 
apie2546's Avatar
 
Join Date: May 2014
Location: Alpine
Posts: 448
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 Trans Am
Engine: 305 LB9
Transmission: 700r4
Blown head gasket??

In my previous thread I was asking about a radiator leak. The shop found the something hit it and cracked it causing it to leak. They also said my head gasket is blown. However it wasn't blown before this? The crack in the radiator shouldn't cause a blown gasket? I started it once without coolant to back it up for the tow truck and that was all. Immediately shut it off. How could this happen?
Old 03-01-2016, 01:08 PM
  #2  
Supreme Member

iTrader: (2)
 
Bob88GTA's Avatar
 
Join Date: Apr 2000
Location: Huntsville AL
Posts: 3,938
Received 98 Likes on 62 Posts
Car: 88GTA
Engine: 5.7TPI
Transmission: Auto
Axle/Gears: 3.27
Re: Blown head gasket??

They SAID your head gasket is blown.....what's the indication? Oil in coolant/ coolant in oil....what? Did you/they do a pressure test of the system? When you backed it up to the tow truck, was the engine hot/cold?

Just a few questions I had to ask.

If you were driving your car and the radiator cracked, pumped all the water out of the system, and you continued to drive it, yes you would have some issues. As in head gasket/engine seize and other catastrophic events. All which are not good.
Old 03-01-2016, 01:10 PM
  #3  
Member
Thread Starter
 
apie2546's Avatar
 
Join Date: May 2014
Location: Alpine
Posts: 448
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 Trans Am
Engine: 305 LB9
Transmission: 700r4
Re: Blown head gasket??

He said when I called that its was pumping out the exhaust lots of smoke, barely holding any coolant in it. No other words on oil in coolant or vice versa. Going there now to see it. The engine was dead cold when I started it in the morning for the tow truck

And no, It was running in the driveway while I cleaned the interior. Saw the huge puddle and shut it off and lifted it to check what broke. Seemed all normal that night except for the leak
Old 03-01-2016, 01:14 PM
  #4  
Supreme Member

iTrader: (2)
 
Bob88GTA's Avatar
 
Join Date: Apr 2000
Location: Huntsville AL
Posts: 3,938
Received 98 Likes on 62 Posts
Car: 88GTA
Engine: 5.7TPI
Transmission: Auto
Axle/Gears: 3.27
Re: Blown head gasket??

yeah, smoke out the tailpipe, barely holding coolant, isn't good.

Sorry to hear. Good luck
Old 03-01-2016, 01:41 PM
  #5  
Member
Thread Starter
 
apie2546's Avatar
 
Join Date: May 2014
Location: Alpine
Posts: 448
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 Trans Am
Engine: 305 LB9
Transmission: 700r4
Re: Blown head gasket??

Originally Posted by Bob88GTA
yeah, smoke out the tailpipe, barely holding coolant, isn't good.

Sorry to hear. Good luck
Quick update: it is nothing like what the counter jockie said. Zero smoke. Zero oil in coolant or vice versa
Old 03-01-2016, 02:20 PM
  #6  
Supreme Member

iTrader: (2)
 
Bob88GTA's Avatar
 
Join Date: Apr 2000
Location: Huntsville AL
Posts: 3,938
Received 98 Likes on 62 Posts
Car: 88GTA
Engine: 5.7TPI
Transmission: Auto
Axle/Gears: 3.27
Re: Blown head gasket??

"it was pumping out the exhaust lots of smoke"




Yeah, i'ts not that bad...
Old 03-01-2016, 02:42 PM
  #7  
Member
iTrader: (1)
 
Ikes 91Z's Avatar
 
Join Date: Aug 2012
Location: Bella Vista, AR
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Car: 1991 Camaro Z28
Engine: LS Conversion
Transmission: 4L60E
Axle/Gears: Stock for now...
Re: Blown head gasket??

Gotta love when they try to squeeze money from ya...
Old 03-01-2016, 06:43 PM
  #8  
Member

iTrader: (3)
 
L0tuS's Avatar
 
Join Date: Nov 2006
Location: Daytona beach
Posts: 238
Received 11 Likes on 5 Posts
Re: Blown head gasket??

if it's that bad fill the radator with water leave the cap off and turn the car on if it's got a bad head gasket it'll shoot it back out of the radiator like to the hood shooting out
Old 03-02-2016, 09:34 AM
  #9  
Junior Member
 
Fanatic1074's Avatar
 
Join Date: Oct 2014
Posts: 55
Likes: 0
Received 0 Likes on 0 Posts
Re: Blown head gasket??

Drain the oil, if it looks milky you got a blown head gasket.
Old 03-02-2016, 10:30 AM
  #10  
Supreme Member

 
gt4373's Avatar
 
Join Date: Nov 2011
Location: CT
Posts: 2,753
Received 259 Likes on 150 Posts
Car: 1984 Chevrolet Camaro Z28
Engine: 5.0 Liter 4-BBL V8 High Output
Transmission: 5-Speed Manual
Axle/Gears: 3.73
Re: Blown head gasket??

Old 03-02-2016, 10:51 AM
  #11  
Junior Member
 
Johngypsy's Avatar
 
Join Date: Mar 2013
Location: Houston tx
Posts: 56
Likes: 0
Received 2 Likes on 2 Posts
Car: 1990 Iroc z
Engine: 5.7 liter Tune port 383 stroker
Transmission: 5-speed
Axle/Gears: 3.45
Re: Blown head gasket??

Believe it or not, the motor will also over hear from the intake gasket also, my car also was in the garage for oh.... 2 plus years and in mechanics hands for several months not starting, does run, but installing parts here and there as we go on, long story short, installed some parts to it, and the intake gasket was taken off one day In order to install some parts to the motor, turns out several months later I forgot about it, but flash back that the intake was not properly seated right at all, and just a minor thing turned out to over heat the car after several miles or so, smoke threw the oil stick and just getting hot, can't figure out why??
New radiator, coolant, termastate, water pump, lower and upper hoses, even the Tpi unit where the water gets in threw and sometimes get clogged after several years, even got a burp part that allows tbr coolant to burp after all of these changes and still get hot and bogs out until after sitting for a few hours, head gaskets are fine... But yea turned out it was the intake gasket, still a job no question to get to it, because our motors are not of the norm, everything has to be removed to get to it,
Hope this helps!

Last edited by Johngypsy; 03-02-2016 at 10:55 AM. Reason: Correction spell is horrable
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Charlie113
Tech / General Engine
3
03-10-2016 02:49 PM
BigDreams92
Tech / General Engine
3
03-06-2016 11:15 PM
ydnar417
Electronics
4
02-29-2016 02:50 PM
edixon24
TPI
7
02-28-2016 07:16 PM



Quick Reply: Blown head gasket??



All times are GMT -5. The time now is 08:45 PM.