‘85 ugly distributor issue. Accel or DUI Distributor?
#1
Member
Thread Starter
Join Date: Jul 2005
Location: Ozarks
Posts: 152
Received 0 Likes
on
0 Posts
Car: 89 IROC - 85 Z28
Engine: 350 / 305
Transmission: 700R4 / T5
Axle/Gears: Stock
‘85 ugly distributor issue. Accel or DUI Distributor?
Need advice please. My son loves this car. 85 Z28 305 , 5 speed, computer controlled carb, HEI distributor. Distributor bushing wore out and is unrebuildable, tried three new different distributors and wouldn’t run. Took to our mechanic who tried his best but couldn’t get to run well as well with stock dist’s. He switched over to a vaccum distributor, ran well for an hour then fell on its face. Question (1) - Is this causing more problems by not having an electronic distributor? SES light is on. We tried stock AC Delco, Cardone and different caps from Auto Zone but none of the original style distributors would run worth a crud. Question (2) - Is the DUI brand computer controlled distributor for $300 or the ACCEL 59130 for $110 the answer???? We’ve previously rebuilt the CC carb , replaced valve seals and springs, fresh plugs and wires. Trying our best to analyze and not just throw parts at it. Up for any all ideas. Thank you for your help
Last edited by CrimsonDragon; 10-10-2023 at 09:18 PM.
The following 2 users liked this post by RedLeader289:
CrimsonDragon (10-10-2023), TylerSteez (10-10-2023)
#3
Member
Join Date: Dec 2021
Location: central Texas
Posts: 281
Received 106 Likes
on
75 Posts
Car: 91 TA Vert WS6-94 TA Vert
Engine: 5.0/5.7 LT1
Transmission: 700R4
Axle/Gears: 2.73-3.42
Re: ‘85 ugly distributor issue. Please help a Dad out!
Why not just rebuild your distributor?
I recall having to do it on my 91 Silverado with a 305.
I recall having to do it on my 91 Silverado with a 305.
#4
Member
Thread Starter
Join Date: Jul 2005
Location: Ozarks
Posts: 152
Received 0 Likes
on
0 Posts
Car: 89 IROC - 85 Z28
Engine: 350 / 305
Transmission: 700R4 / T5
Axle/Gears: Stock
#5
Member
Thread Starter
Join Date: Jul 2005
Location: Ozarks
Posts: 152
Received 0 Likes
on
0 Posts
Car: 89 IROC - 85 Z28
Engine: 350 / 305
Transmission: 700R4 / T5
Axle/Gears: Stock
#6
Supreme Member
iTrader: (2)
Join Date: Apr 2000
Location: South Windsor, CT
Posts: 1,264
Likes: 0
Received 212 Likes
on
178 Posts
Car: '89 GTA
Engine: ZZ6TPI
Transmission: T56
Axle/Gears: Borg Warner 3.70:1
Re: ‘85 ugly distributor issue. Please help a Dad out!
There really isn't much to the electronic controlled distributors. If the old one worked except for the worn bushing, you could move all of the electronic parts over from the old one to the new one and try that.
#7
Member
Thread Starter
Join Date: Jul 2005
Location: Ozarks
Posts: 152
Received 0 Likes
on
0 Posts
Car: 89 IROC - 85 Z28
Engine: 350 / 305
Transmission: 700R4 / T5
Axle/Gears: Stock
Re: ‘85 ugly distributor issue. Please help a Dad out!
Thread
Thread Starter
Forum
Replies
Last Post