Throttle body thing
#1
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Virginia
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
Engine: 305 TPI
Throttle body thing
Can someone tell me what this is? It is a hard plastic tube that connects to the underside of the throttle body. I read the haynes manual when I removed my throttle body and it did not mention this.
#3
Senior Member
Join Date: May 2003
Location: Houston-katy
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Irocz- Houstons Fastest Street
Engine: 408 LS1 w/ 2 stage
Transmission: Turbo 350
Axle/Gears: 3:73,3850 lbs , best of 9.92 @ 138
if i am not mistaken it connects to your emmissions carbon cannister or ac vacuum, i could be wrong though, follow the line and see where it leads
#5
I have to replace all my vacuum lines for the same reason, dry rot and such, everything broke. So I found some drawings of how they were layed out and I also found a post in this forum of what I could use to replace them.
http://chevythunder.com/fuel%20injec...um%20lines.htm
for the layout and
http://store.summitracing.com/defaul...6&N=110&view=2
for the new lines
I hope this helps
http://chevythunder.com/fuel%20injec...um%20lines.htm
for the layout and
http://store.summitracing.com/defaul...6&N=110&view=2
for the new lines
I hope this helps
#6
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Virginia
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
Engine: 305 TPI
Thanks everyone for the replys.
88cam your links were very helpful.
I just got a piece of tubing from the auto store and connected the 2 lines together for now.
88cam your links were very helpful.
I just got a piece of tubing from the auto store and connected the 2 lines together for now.
Thread
Thread Starter
Forum
Replies
Last Post
mdtoren
Tech / General Engine
0
08-16-2015 05:45 PM