TPITuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
what are the stock timing specs for this car.. the decal is long gone and I can't seem to find it in my shop manual. if I recall it was 6deg btdc for my 5.0L TPI iroc, is it the same for the 5.7?
I'm trying to get a bit more power out of this car, today I check the fuel pressure and found it is good at 44psi, and the timing is set to 0.
__________________
- Chris -
Check my vBGarage for Mods - currently updating, check it out and leave a comment!
here is a little infor for you guys its at 6 but if you want to get just a little more power out of you time and valve tran you can more it up to about 8 or 9 and you will see a big difference