narrowed
#1
Junior Member
Thread Starter
Join Date: Jul 2011
Location: waxahachie, TX
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 z28 pace car
Engine: 383 in the works
Transmission: on the fence
Axle/Gears: 3.23 posi rear disk
narrowed
have any of you guys narrowed and tubed the rear end? i am concered about the 10bolt. in the future the long term plan is street car with trips
to the track often.. 600HP BBC auto tranny, jury is still out on which one with 3.73 gears. i dont want to brake an axle..
i heard 12 bolts dont fit unless you buy one set up aftermarket..
i would like to see some pics of the underside of some stock, modified and narrowed set ups..]thanks guys
to the track often.. 600HP BBC auto tranny, jury is still out on which one with 3.73 gears. i dont want to brake an axle..
i heard 12 bolts dont fit unless you buy one set up aftermarket..
i would like to see some pics of the underside of some stock, modified and narrowed set ups..]thanks guys
#2
Supreme Member
iTrader: (5)
Join Date: Mar 2011
Location: Central Texas
Posts: 2,893
Likes: 0
Received 4 Likes
on
4 Posts
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: narrowed
The 10-bolt is marginal behind even a stock 3rd gen SBC. Be lucky to get it to survive 1 single launch behind a 660hp BBC.
Do it once, do it tight & order you an aftermarket (like one from Moser) 9" or 12-bolt already setup for a 3rd gen.
Do it once, do it tight & order you an aftermarket (like one from Moser) 9" or 12-bolt already setup for a 3rd gen.
Thread
Thread Starter
Forum
Replies
Last Post
tyeo098
Tech / General Engine
38
11-30-2015 06:27 PM