is there any ways to identify injectors?
#1
Senior Member
Thread Starter
Join Date: May 2006
Location: NorCal
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS(RealSlow)
Engine: 3.1L
Transmission: 700R4
Axle/Gears: unknown/mostlikelycrappy
is there any ways to identify injectors?
man after reassembling my 3.1 engine back,
I have a bad misfire..
i can hear loud pop from my passenger side bank of engine around
cyl 3 and 5.
i took the plug wire out, the plug wire was burnt and the plug was cracked in no4 cylinder. so I thought woohoo easy fix!
but then with the new one in I still have the same problem.
im thinking its possible i hooked the wrong injector wires back in,
although i labeled them..
is there a color code to like which cylinder it goes to? or is there a way to identify which goes to which?
thanks in advance..ive been stuck in my garage for 4days for this..
I have a bad misfire..
i can hear loud pop from my passenger side bank of engine around
cyl 3 and 5.
i took the plug wire out, the plug wire was burnt and the plug was cracked in no4 cylinder. so I thought woohoo easy fix!
but then with the new one in I still have the same problem.
im thinking its possible i hooked the wrong injector wires back in,
although i labeled them..
is there a color code to like which cylinder it goes to? or is there a way to identify which goes to which?
thanks in advance..ive been stuck in my garage for 4days for this..
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
Linson
Auto Detailing and Appearance
40
08-21-2015 02:12 PM