Harris Performance
Thread Starter
Member
iTrader: (6)
Joined: Feb 2008
Posts: 163
Likes: 0
From: Ft. Wayne, IN
Car: 1987 Firebird Formula
Engine: 355
Transmission: 700R4
Axle/Gears: Posi, 3.23
Harris Performance
Just thought I would put in a good word for this man.
I just ordered a stage 1 chip for my TPI 355 on Thursday evening, came home today from work and it was sitting in my mail box. Apparently he adjusts the fuel curve and the spark a little bit and I had him over ride the stock 305 PROM to run LT1 injectors and disable the smog pump stuff.
Put the chip in, started the car, runs BEAUTIFUL. Took it around the block, and honestly, I can feel a little bit more power coming from under the hood with the butt dyno.
Going to have the car dynoed here in a couple weeks so I'll be able to see what she's actually putting out.
I'm very excited because this was my first engine build and swap project and so far it's going very good.
For a mail order computer chip, he did a fantastic job for my car. Exactly what I was looking for. I give this guy 2 thumbs up. I would give him more if I had more thumbs. I'm very impressed by the fast turn around time also.
I just ordered a stage 1 chip for my TPI 355 on Thursday evening, came home today from work and it was sitting in my mail box. Apparently he adjusts the fuel curve and the spark a little bit and I had him over ride the stock 305 PROM to run LT1 injectors and disable the smog pump stuff.
Put the chip in, started the car, runs BEAUTIFUL. Took it around the block, and honestly, I can feel a little bit more power coming from under the hood with the butt dyno.
Going to have the car dynoed here in a couple weeks so I'll be able to see what she's actually putting out.
I'm very excited because this was my first engine build and swap project and so far it's going very good.
For a mail order computer chip, he did a fantastic job for my car. Exactly what I was looking for. I give this guy 2 thumbs up. I would give him more if I had more thumbs. I'm very impressed by the fast turn around time also.
Senior Member
Joined: Mar 2003
Posts: 851
Likes: 3
From: vacaville,ca
Car: 1988 camaro z28,1997 camaro lt1
Engine: 355 afr 195 heads,tpis big mouth
Transmission: 700r-4 built by me 3-4 z pack
Axle/Gears: 3.42
Re: Harris Performance
do they have a web site?.
Just thought I would put in a good word for this man.
I just ordered a stage 1 chip for my TPI 355 on Thursday evening, came home today from work and it was sitting in my mail box. Apparently he adjusts the fuel curve and the spark a little bit and I had him over ride the stock 305 PROM to run LT1 injectors and disable the smog pump stuff.
Put the chip in, started the car, runs BEAUTIFUL. Took it around the block, and honestly, I can feel a little bit more power coming from under the hood with the butt dyno.
Going to have the car dynoed here in a couple weeks so I'll be able to see what she's actually putting out.
I'm very excited because this was my first engine build and swap project and so far it's going very good.
For a mail order computer chip, he did a fantastic job for my car. Exactly what I was looking for. I give this guy 2 thumbs up. I would give him more if I had more thumbs. I'm very impressed by the fast turn around time also.
I just ordered a stage 1 chip for my TPI 355 on Thursday evening, came home today from work and it was sitting in my mail box. Apparently he adjusts the fuel curve and the spark a little bit and I had him over ride the stock 305 PROM to run LT1 injectors and disable the smog pump stuff.
Put the chip in, started the car, runs BEAUTIFUL. Took it around the block, and honestly, I can feel a little bit more power coming from under the hood with the butt dyno.
Going to have the car dynoed here in a couple weeks so I'll be able to see what she's actually putting out.
I'm very excited because this was my first engine build and swap project and so far it's going very good.
For a mail order computer chip, he did a fantastic job for my car. Exactly what I was looking for. I give this guy 2 thumbs up. I would give him more if I had more thumbs. I'm very impressed by the fast turn around time also.
Junior Member
Joined: Mar 2008
Posts: 39
Likes: 0
From: Palm Bay, Florida
Car: 1991 RS (sold), 1991 Z28
Engine: LO3, L98
Transmission: T5, 700r4
Axle/Gears: 2.73, 3.23
Re: Harris Performance
i also ordered one of these chips and got it today for my 1991 stock camaro RS LO3 engine. my engine had a code 51 and there was no way i could get the code to disappear, i had him program a chip for me for $112 and it was programmed for stage 1 and the only mod i wanted was the speed limiter taken off. i put it in, but had a little problem a couple of times getting it to to seat correctly in the slot before the flashing SES light would go away, my car has never ran like this before, i use to have a high idle and a bogging on WOT, now i can't believe that i have a CAR now. not some thing that i am trying to fix. but a REAL car with no problems. no trouble codes and a nice smooth idle that revs hard. i dont care what anyone says about the LO3 engines...after this chip...this car flys on stock.
Joined: Jun 2005
Posts: 217
Likes: 0
From: Santa Clarita, California
Car: 1990 RS/2000 Z28
Engine: 5.0/5.7
Transmission: 4L60/4L60E
Axle/Gears: 10 bolt/3.23
Re: Harris Performance
TBICHIPS.com and TPICHIPS.com
Last edited by ABJ88; Jun 30, 2009 at 04:34 AM.
Thread Starter
Member
iTrader: (6)
Joined: Feb 2008
Posts: 163
Likes: 0
From: Ft. Wayne, IN
Car: 1987 Firebird Formula
Engine: 355
Transmission: 700R4
Axle/Gears: Posi, 3.23
Re: Harris Performance
My bad, forgot to mention his websites. I believe he's under both names on eBay as well.
Member
Joined: Jun 2009
Posts: 344
Likes: 0
From: Southern California
Car: 1992 Camaro RS
Engine: 8.0:1 454/Mild Hyd roller/Accel DFI
Transmission: WC T5
Axle/Gears: Stock 1992 open 7.5" 2.73 ratio
Re: Harris Performance
I have bought several chips from this guy. He did one for a TBI 305, TBI 327, TBI 4.3l, TPI 327, TPI 350, and my TPI 383. Always very good communication, fast turn around and very good products. I built a 383 for my camaro a few years back with Dart Iron eagle 200s, 10.8:1 compression and a massaged stock TPI setup off an 85 vette. Coverted it to speed density called Brian and told him my cam specs and in a week I had a chip. I've never had a 383 that ran that good before then or since.
Member
Joined: Feb 2007
Posts: 127
Likes: 0
Car: 89 Trans Am
Engine: 5.0 TPI
Transmission: 700R4
Axle/Gears: 2.73 Posi
Re: Harris Performance
I was in a pinch last year as my prom got fried, he was able to get me a new prom / memcal for a stock TPI 305 in 3 days. No problems
Good guy and great service
Good guy and great service
Trending Topics
Thread Starter
Member
iTrader: (6)
Joined: Feb 2008
Posts: 163
Likes: 0
From: Ft. Wayne, IN
Car: 1987 Firebird Formula
Engine: 355
Transmission: 700R4
Axle/Gears: Posi, 3.23
Re: Harris Performance
I'm happy to hear all of the good comments about him. My Formula is still running perfect and don't have any complaints at all. I would recommend him to anyone looking for a chip, and he's very reasonable on his pricing as well.
Member
Joined: Jul 2008
Posts: 248
Likes: 1
From: North Carolina
Car: 92 RS camaro, 99 Z-24 cavalier
Engine: 5.0L TBI, 2.4L
Transmission: 700r4
Axle/Gears: 2.73
Re: Harris Performance
Anyone know if he is still burning chips or selling any of the premade stage 1 or 2 chips? Interested in purchasing one if he still is.
Joined: Mar 2008
Posts: 2,943
Likes: 20
From: Boston, MA
Car: 1983 Pontiac Trans Am Daytona 500
Engine: Crossfire 305ci V8
Transmission: Jasper 700R4 4 speed Automatic
Axle/Gears: 3.23 limited slip/posi
Re: Harris Performance
ebl flash cfi
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
