Classic industries
#1
Junior Member
Thread Starter
Join Date: Nov 2018
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89' Firebird Formula 350
Engine: 5.7L, TPiS MiniRam, 195 Alum Heads.
Transmission: 700r4
Axle/Gears: 3.08, 9bolt
Classic industries
Have many of you had success with Classic Industries for your parts?
#2
Supreme Member
iTrader: (58)
Re: Classic industries
Not recently... In the past I've ordered a few things from them. Of course back then most of what they carried was NOS GM parts, not like mostly reproductions they offer now. To be completely fair, most of what they carry is the exact same parts everyone carries. Thirdgen resto parts aren't terribly common, not enough for multiple companies to commission the same part.
#3
Junior Member
Thread Starter
Join Date: Nov 2018
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89' Firebird Formula 350
Engine: 5.7L, TPiS MiniRam, 195 Alum Heads.
Transmission: 700r4
Axle/Gears: 3.08, 9bolt
Re: Classic industries
Just curious. Had ordered a fuel sending unit from them and was hoping the accuracy of it for the gauge was going to be right on since NOS units aren't available anymore. Can't find them anywhere else that are new.
#4
Member
iTrader: (3)
Join Date: Jan 2013
Location: Gresham Oregon
Posts: 316
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1985 Z28 & 1997 Z28 SS SLP
Engine: Sbc 305 TPI & LT1
Transmission: 700r4 and A4
Axle/Gears: 9 bolt Posi 323 & Posi 323
Re: Classic industries
I have used them in the past when I owned a 2nd gen TA, no problems. If I recall, they have an extensive catalog FWIW......By best luck sourcing parts for 3rd gens has always been TGO classifieds, junk yards, third gen ranch and hawks
#5
Junior Member
Thread Starter
Join Date: Nov 2018
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89' Firebird Formula 350
Engine: 5.7L, TPiS MiniRam, 195 Alum Heads.
Transmission: 700r4
Axle/Gears: 3.08, 9bolt
Re: Classic industries
Thanks for the input. Was looking at interior as well. carpet, recovering seats, etc. 30 years takes it toll.
#6
Senior Member
Re: Classic industries
Anybody have any experience with their quarter panels?
Trending Topics
#8
Junior Member
iTrader: (1)
Join Date: Apr 2006
Location: Perrysburg, Ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Firebird
Engine: 400 sbc
Transmission: TH400
Axle/Gears: Ford 9" 3.50 35 Spline
Re: Classic industries
I have used the OER carpet they sell. not in a Fbody, but it was good quality.
#10
Supporter/Moderator
iTrader: (7)
Join Date: Feb 2001
Location: Cincinnati, OH
Posts: 13,214
Likes: 0
Received 375 Likes
on
288 Posts
Car: '90 RS
Engine: 377 LSX
Transmission: Magnum T56
Re: Classic industries
I recently bought their 6 gage panel ABS cluster. Shipping was free (black Friday) and it was sent very quickly. The quality of it is unknown until I tinker with it but overall it looks like a nice piece. Their catalog if massive. I wouldn't trust any non OEM metal regardless of the supplier.
Thread
Thread Starter
Forum
Replies
Last Post
Z28BOYZ
Auto Detailing and Appearance
2
07-18-2001 11:29 PM
86Z28TPI
Aftermarket Product Review
4
06-27-2001 12:15 AM
Tom Batts
Auto Detailing and Appearance
6
05-31-2001 03:57 PM
pvknight
Auto Detailing and Appearance
2
10-25-2000 12:04 AM