does anyone have the article ( or know where to find one) from the All Chevy magazine where they did a blue 91z28 project car (in 91 or 82). I have a book called Camaro Performance and this car is in it.. Basically I just want to get the wheel an dtire specs on it . any help is great!

 

:hail:

 

this car?

 

they are boyd coddington rodder 5s...

 

those r hot rims and camaro.....remind me of mine a little

 

I have most of the issues with the buildup and the final issue with the big spread on the finished product.

 

No, that's not it. It's the same color as your hoopty with Weld Prostars.

 

I know the car, I have that book too. Sorry, no info.

 

Man that Camaro on Boyds looks tight!!! I cant wait to get my Boyds on my 91z. I'm just waiting to get my rear spring pertches so I can even out the drop. Should be another 2 or 3 weeks!!

 

Which wheel and tire package are you interested in? At one point they had it set up with Gatorbacks and Jongbloed wheels for corner carving.

 

Thanks foe the help. Is tegre any chance that i could get u to copy some of those articles for me acceld Z? I give you some money or something for your troubles?

 

sorry for the bad english i am typing while at work ! ha ha

 

rims look too bling bling.

 

i have the "82-92 camaro performance handbook" which has a little on that car your talking about, a few different pics but im without a scanner, and the mag has no wheel/tire info about it.

good luck though

 

What size are those rims, I want I want, they look really good, really pricey im guessing. they kinda look like 20's but there probably 18's. that back rims look phat with the deeper dish look.

 

Nevermind

 

So it's the drag setup you're interested in? I have a scanner and i'd be more than happy to scan the articles for you. I just need to dig the magazines out. And no, you won't be paying me.

 

yes its the drag set up, that would be awsome if you could do that, i really appreciate it! thanks a million.

 

I'll dig the article out tomorrow and scan them.

 

I am really interested in these wheels, anyone have any clue what size the wheels and tires are. Also what type of drop the car has, those wheels look perfect on that car.

 

Actually that car was in a back issue of Camaro Performers. The mag comes out bi-monthly (six issues annually). The mag is made by super chevy, but they do not offer a subscription for it. I have 2 years worth of issues and usually find it at Wal-Mart every couple months.

 

I have that mag, the engine is all polished and look's amazing on that car. The same mag has that awsome twin sc camaro with the reverse style opening hood!!

 

Beautiful!!:hail:

 

I'd also be interested in the articles. Not for the wheel and tires, but for the actual evolutions of the engine combo and it's performance results. Please let me know if you put them up on the web. If you don't have space I can probably host them for you.

 

yo guy you have a viper!!! :hail:

 

he is a member on this site although he doesn't post much and rarely puts pictures up. beautiful car!

 

That guy is a member on this site, that's cool!! It seem's like anyone with a killer third gen is a member on this site.(glad I found it)

P.S. I don't have a scanner so I can't get any of that mag to anyone, sorry guy's!!!

 

Bump for Accld Z. Any scans, by chance?

 

acceld z is an azzclown, i'll go message him in msn messenger for you he has a very short term memory.... (too many cheesy poofs)

 

I dont have my scanner hooked up but Hold on a Digi pic may look ok.. brb.

 

LARGE PHOTOS....
Sorry for the ****ty quality. I need to learn how to take good Photos on mag pic's. anybody have a sony DSC-S85 digi cam they can give me some setting tips.

http://www.cecoatings.com/images/mis...r/Dsc00381.jpg

http://www.cecoatings.com/images/mis...r/Dsc00382.jpg

 

Guys, the article I have is not of the car that Easyspeed posted. The guy that started this thread was talking about a project car that All Chevy magazine did.

 

Thanks TPI383. I'm actually looking for scans of the Super Chevy articels documenting the modification process and results for that car you posted.

 

Ya, I'm looking for the All Chevy/Super Chevy project car. It's the one TPI383 posted pictures of, correct?

 

Keep digging, punk. Revenge will be sweet

 

That's the one. I was only able to find about 4 of the buildup articles. They did........

1. MSD install
2. Herb Adams LCA and trackbar install
3. Herb Adams TA install (crazy looking thing)
4. The final unveiling

 

anybody recall What month etc the Mag was Odds are I have it on a Box full of my Mags... I can get pic's of the articles for ya..

I found a setting on my digi for taking pic's of text so it should be readable...

 

I don't know which issues had articles for that project car. It looks like AcceldZ has the first several articles. Maybe you could use that as a starting point reference. I'd be interested in any/all of them. I can never get enough of 3rd gen buildups.

 

Bsing with Accelled on AIM now... I will upload what ever he e-mails me 2morrow.. gota head to work later 2nite.

 

Anybody have any clues on what size wheels and tires those are, with out offsets. Also has the car been lowered?

 

Wheels look like 19's to me..even tho they dont make many wheels in that size anymore..but they look to big to be 18's..and to small to be 20s sooooo duh? looks like a 2 in lower as well..but the pic is kinda an odd angle to eye this, im sure its in that article if whoever has it will look.

 

The wheel's are 18'' rodder wheel's, and it has a 2-1/4'' drop. The motor is a 383.

 

ttt. Here ya go 5articles and more pic's

http://www.cecoatings.com/images/misc/Magcar/

Thanks to Paul for e-mailing them to me to upload.

 

Thanks guys.

 

I know i'm bringing this back from forever ago, but i would like to see those articles or at least know the months they were from. That is the All Chevy camaro, not the one with the boyds

Thanks,

-Jim