Opinions please!
#1
Thread Starter
Senior Member
Joined: Aug 2004
Posts: 572
Likes: 0
From: Port Huron Mi
Car: 87 Formula
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: Stock 9 bolt
Opinions please!
ok ive got my 89 rs stripped down right now and im trying to figure out what exactly im goin to do with it cause im almost ready to paint the engine compartment right now my thoughts are the color in this pic below. i guess its the stock color but it looks darker to me i dont really like to stock clor ill prolul jus get it tinted a few shades darker and im thinkin about puttin a blue pearl over everyhting what do you guys think of this? and also what rims would you reccommend im sure snypers/tt2s and some other ones will come up but im lookin for somehtin new and fresh
Thnaks guys lemme kno what u htink
Kevin
Thnaks guys lemme kno what u htink
Kevin
#3
Thread Starter
Senior Member
Joined: Aug 2004
Posts: 572
Likes: 0
From: Port Huron Mi
Car: 87 Formula
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: Stock 9 bolt
haha that would look real good but if i went to a meet of EVERYONE from tgo i would want people to walk up and say o look its kevins car w/o even having to think about it
#6
Thread Starter
Senior Member
Joined: Aug 2004
Posts: 572
Likes: 0
From: Port Huron Mi
Car: 87 Formula
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: Stock 9 bolt
wowo i really like those rims boyds tho might be a lil outa my $ range
As fas as the pink goes i want people to notice it not laugh at it lol
As fas as the pink goes i want people to notice it not laugh at it lol
Trending Topics
#8
Supreme Member
iTrader: (2)
Joined: Jan 2001
Posts: 4,149
Likes: 2
From: Tampa, FL, USA
Car: 93 240SX
Engine: LQ9
Transmission: T56
Axle/Gears: 3.54 R200 IRS
Pricing aint too bad on em
17" $1280
8"
9.5" add $30 per wheel.
http://shop.sportruck.com/bcodd/sig/index.html
17" $1280
8"
9.5" add $30 per wheel.
http://shop.sportruck.com/bcodd/sig/index.html
#9
Supreme Member
iTrader: (2)
Joined: Jan 2001
Posts: 4,149
Likes: 2
From: Tampa, FL, USA
Car: 93 240SX
Engine: LQ9
Transmission: T56
Axle/Gears: 3.54 R200 IRS
IMO go less crazy on the paint and spend the extra $ towards the rims, wheels make or break a car, the paint color as is would look beautiful with those rims.
#10
Senior Member
iTrader: (1)
Joined: Mar 2004
Posts: 584
Likes: 2
From: Metter, Ga
Car: 1992 Camaro z28
Engine: 350 HSR
Transmission: 700R4
Axle/Gears: 3.42's
Those wheel would probably look a ton better with a soft lip.
I say spend a couple hours looking at pics until you find the color you like.......i did it and ended up going with the first color i seen(corvette Red).
I say spend a couple hours looking at pics until you find the color you like.......i did it and ended up going with the first color i seen(corvette Red).
#11
Supreme Member
Joined: Jun 2001
Posts: 1,012
Likes: 0
From: Allensville, PA
Car: 1988 Trans Am GTA
Engine: 5.7 TPI (Now HSR)
Transmission: 700R4 by Probuilt
Axle/Gears: 3:27 9 Bolt Posi W/ Discs
well IMO I wouldnt go with large rims at all, too many people do it and to me its a little overdone. I am thinking more along the lines of some wide tires in the rear and skinnier ones up front on a 15 inch wheel like a prostar or draglite. I think that look on a camaro with a cowl hood looks killer and as for the color I would also do osmehting a little different like maybe a silver or darker gray, I just feel like if your going to do something custom enough to be noticed dont do it like everyone else on here does it, be different and make the car yours.
#13
does it have to be 5 spoke?
here are some good links to custom wheel pics.
intro/hvydeez originally.. http://introwheels.com/gallery/cars
boze.. http://www.bozeforged.com/gallery.htm
budnik.. http://www.budnik.com/gallery.asp
i think the real question is size and budget. any of the above expect to pay close to 2500-3000 with tires. you can save alot by sticking to 16 or 17" sizes.
here are some good links to custom wheel pics.
intro/hvydeez originally.. http://introwheels.com/gallery/cars
boze.. http://www.bozeforged.com/gallery.htm
budnik.. http://www.budnik.com/gallery.asp
i think the real question is size and budget. any of the above expect to pay close to 2500-3000 with tires. you can save alot by sticking to 16 or 17" sizes.
#14
Thread Starter
Senior Member
Joined: Aug 2004
Posts: 572
Likes: 0
From: Port Huron Mi
Car: 87 Formula
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: Stock 9 bolt
Thanks for all the input guys
As far as spending money on paint im not to concerned i paint cars so ill be doin it myself not to expensive
I want to go with at least a 17 inch rim i really perferr the aggressive look of lowerd porlly sportlines with 17 or maybe even 18s
Not a fan of skinies or draglites or basically any weld rim srry guys definitly wont be going that route
As far as grey or silver that does look really good but not my taste i perferr a darker COLOR something with a color to it not blakc grey or white you know and how many 3rd gens have you seen dark greek/teal with a blue pearl coat?
As far as spending money on paint im not to concerned i paint cars so ill be doin it myself not to expensive
I want to go with at least a 17 inch rim i really perferr the aggressive look of lowerd porlly sportlines with 17 or maybe even 18s
Not a fan of skinies or draglites or basically any weld rim srry guys definitly wont be going that route
As far as grey or silver that does look really good but not my taste i perferr a darker COLOR something with a color to it not blakc grey or white you know and how many 3rd gens have you seen dark greek/teal with a blue pearl coat?
#15
Supreme Member
Joined: Nov 2003
Posts: 3,383
Likes: 0
From: surrey b.c. canada
Car: 89 Iroc
Engine: lb9
Transmission: wc t-5
Axle/Gears: 10 bolt 3.08 posi
why not paint it gunmetal? i think its awsome colour and looks fantaastic on camaros, as for wheels i'm still a big fan of the stock 88 double stripe iroc wheels
#16
Thread Starter
Senior Member
Joined: Aug 2004
Posts: 572
Likes: 0
From: Port Huron Mi
Car: 87 Formula
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: Stock 9 bolt
well my mind changes like the wind and i had an awesome idea in a dream i had while sleeping in lit class today lol ill post a pic soon as i get it chopped up
#17
Thread Starter
Senior Member
Joined: Aug 2004
Posts: 572
Likes: 0
From: Port Huron Mi
Car: 87 Formula
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: Stock 9 bolt
ok hers the official worlds worst phototshop prolly woulda looked better in paint haha lemme kno wut u htink and if someone can do it better pleaqse do do lol
#18
Joined: Dec 2000
Posts: 1,912
Likes: 48
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Originally posted by Z28racer
Pick your color, just put it on these.
Pick your color, just put it on these.
http://www.horsepowerjunkies.com/gal...postchris4.jpg
#20
Supreme Member
Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
Originally posted by megaracerx
paint her black, witha 2" cowl, and chrome zo6 wheels and call it a day.
paint her black, witha 2" cowl, and chrome zo6 wheels and call it a day.
89 had the plain(er) gfx package correct?
ps, thanks for the sig FndmntlsOfPimpn
Brandon
#24
Thread Starter
Senior Member
Joined: Aug 2004
Posts: 572
Likes: 0
From: Port Huron Mi
Car: 87 Formula
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: Stock 9 bolt
well im pretty sure that im gonna go with a more complex paint job i want sonething that satnds out a little more and not all jus one color i like the red/black/silver combo and i reall like those rims i drew up this design in lit class its a rough idea but what do you think?
#29
Senior Member
Joined: Jul 2002
Posts: 754
Likes: 0
From: South East MI
Car: 1992 Camaro RS AKA Big Nasty
Engine: Carbed '79 350 block, 360hp/380ftlbs (flywheel)
Transmission: 6speed from an unidentified 4th gen. ask me, ill tell you.
Keep her clean, keep her white!
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
05-17-2020 10:44 AM
LiquidBlue
Wheels and Tires
32
12-10-2019 04:06 PM
skinny z
Engine/Drivetrain/Suspension Parts for Sale
5
10-05-2015 06:23 PM