got the new fogs in..
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2005
Posts: 1,926
Likes: 3
From: mid GA
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
got the new fogs in..
well it took me about three to four hours to get it completely done. but i bought those blazer foglights from walmart and mounted them behind a mesh grill behind the iroc grill. looks great in my opinion ive been wanted to do this for a while. the lights are so much brighter than the originals but i still have to adjust them. are there any tricks to adjusting them? here are some pics...
first one is just a mock up.
first one is just a mock up.
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2005
Posts: 1,926
Likes: 3
From: mid GA
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
all turned on. they are amazingly bright almost as bright as the headlights.
Supreme Member
iTrader: (45)
Joined: Dec 2003
Posts: 3,970
Likes: 1
From: Northern, VA
Car: Pair of 92 Z28s
very cool idea...was thinking about that myself but i just ditched my fog lights all together...
Oh ya...is that ur house?...if so can i rent out ur garage?
Oh ya...is that ur house?...if so can i rent out ur garage?
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2005
Posts: 1,926
Likes: 3
From: mid GA
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
ya thats my house im guessing you like the lift? my grandfather sells them. its kinda a pain b/c its not in the shop its in the garage on the house so i had to go back and forth for tools.
Trending Topics
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2005
Posts: 1,926
Likes: 3
From: mid GA
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
"How did you mount them?"
when i took out the old fog lights there were three holes but the middle one was not used i just drilled out the middle one to make it bigger and mounted the foglights there. these fogs only have one screw which mounts them and adjusts them. then i spliced into the stock wiring, mounted the mesh, and put the grill back in. it took me so long b/c i had to run to the store to get wire connectors then i went to home depot and got the mesh. so it really wasnt that hard. mounting the mesh was the most time consuming b/c i had to cut it out of the sheet and i wanted to get it secured well and keep it as straight as possible.
when i took out the old fog lights there were three holes but the middle one was not used i just drilled out the middle one to make it bigger and mounted the foglights there. these fogs only have one screw which mounts them and adjusts them. then i spliced into the stock wiring, mounted the mesh, and put the grill back in. it took me so long b/c i had to run to the store to get wire connectors then i went to home depot and got the mesh. so it really wasnt that hard. mounting the mesh was the most time consuming b/c i had to cut it out of the sheet and i wanted to get it secured well and keep it as straight as possible.
Member
Joined: Oct 2004
Posts: 320
Likes: 0
From: nj
Car: 1985 iroc-z
Engine: 305 tpi with hooker super comp exhaust
Transmission: stock 700r4
i went out and got those fog lights too..but mine sit a little crooked. my cars front end is off a z28 without the fog lights so i had to drill my own holes and all. im hoping i can have it resolved soon....how far do the lights sit back on your car? i dont want mine 2 sit up 2 far and look stupid, lol
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2005
Posts: 1,926
Likes: 3
From: mid GA
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
Originally posted by 91blue_fire
i went out and got those fog lights too..but mine sit a little crooked. my cars front end is off a z28 without the fog lights so i had to drill my own holes and all. im hoping i can have it resolved soon....how far do the lights sit back on your car? i dont want mine 2 sit up 2 far and look stupid, lol
i went out and got those fog lights too..but mine sit a little crooked. my cars front end is off a z28 without the fog lights so i had to drill my own holes and all. im hoping i can have it resolved soon....how far do the lights sit back on your car? i dont want mine 2 sit up 2 far and look stupid, lol
Member
Joined: Oct 2004
Posts: 320
Likes: 0
From: nj
Car: 1985 iroc-z
Engine: 305 tpi with hooker super comp exhaust
Transmission: stock 700r4
oh wait a second...are they sopposed 2 be mounted BEFORE the black grille...kinda all the way back? because mine are about half way through..i drilled my own holes and stuff there...its good now u cant see them. lol.
Supreme Member
iTrader: (5)
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
i like the lift setup, how tall is it and who makes it? also the new fogs look sweet, i'm not sure how I feel about the mesh grill in front of them though.
Supreme Member
iTrader: (25)
Joined: Jul 2004
Posts: 2,623
Likes: 0
From: Beautiful BC
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
I'm jealous... I want a lift!! I would move my tools too 
Great looking lights.. I am looking for replacement bulbs for my foglights to make them a bit brighter.. perhaps I'll have to replace the entire assembly like you have.

Great looking lights.. I am looking for replacement bulbs for my foglights to make them a bit brighter.. perhaps I'll have to replace the entire assembly like you have.
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2005
Posts: 1,926
Likes: 3
From: mid GA
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
to all who are interested in the lift my grandfather sells them so if you want one pm me and i will give you his name and #. i love having the lift it makes everything so much easier. and we double stack cars on it too so it saves alot of space. and with our 7 cars and a boat we need all we can get. this lift is top quality stuff it is the best at all the shows i have been to. its not like that chinese stuff everyone is selling now.
thanks for the compliments on the lights guys i really appreciate it.
Brisk- i think you can get silverstar replacement bulbs for the fogs. i replaced the lights in my stock fogs with sylvania lights and these new fog lights are 2x as bright.
91blue_fire- yes i mounted mine b4 the black grill all the way back that was the look i was going for but the stock fog lights sit in the black grill that says camaro.
thanks for the compliments on the lights guys i really appreciate it.
Brisk- i think you can get silverstar replacement bulbs for the fogs. i replaced the lights in my stock fogs with sylvania lights and these new fog lights are 2x as bright.
91blue_fire- yes i mounted mine b4 the black grill all the way back that was the look i was going for but the stock fog lights sit in the black grill that says camaro.
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
6
Sep 13, 2017 12:58 PM





IMO mesh grill's look cheap
