Where do you buy chrome mastercylinder and radiator covers?
Thread Starter
Joined: Jul 2005
Posts: 638
Likes: 0
From: Toronto,Ontario
Car: 1989 IROC-Z
Engine: 346 LS6
Transmission: T56
Axle/Gears: Hybrid 8.8 3.73
Where do you buy chrome mastercylinder and radiator covers?
Hello
I am interested in a chrome master cylinder cover and a rad cover that would replace the factory plastic one as seen in the pic.
I dont know the owners of the cars and i hope its ok showing these pics without their permission.
I have seen the master cylinder covers on more than one car but the rad cover i have only ever seen on that yellow IROC. Hopefully the owner can jump in and point me in the right direction.
Thanks
speed
I am interested in a chrome master cylinder cover and a rad cover that would replace the factory plastic one as seen in the pic.
I dont know the owners of the cars and i hope its ok showing these pics without their permission.
I have seen the master cylinder covers on more than one car but the rad cover i have only ever seen on that yellow IROC. Hopefully the owner can jump in and point me in the right direction.
Thanks
speed
Senior Member
Joined: Jul 2003
Posts: 568
Likes: 2
From: Toronto, On.
Car: 1985 IROC-Z / Z-28
Engine: 383 C.I. Stroked 6.3 Litre
Transmission: 700R-4
Axle/Gears: 3:73 Posi
Hello
I am interested in a chrome master cylinder cover and a rad cover that would replace the factory plastic one as seen in the pic.
I dont know the owners of the cars and i hope its ok showing these pics without their permission.
I have seen the master cylinder covers on more than one car but the rad cover i have only ever seen on that yellow IROC. Hopefully the owner can jump in and point me in the right direction.
Thanks
speed
I am interested in a chrome master cylinder cover and a rad cover that would replace the factory plastic one as seen in the pic.
I dont know the owners of the cars and i hope its ok showing these pics without their permission.
I have seen the master cylinder covers on more than one car but the rad cover i have only ever seen on that yellow IROC. Hopefully the owner can jump in and point me in the right direction.
Thanks
speed
also he can get you a cover for the Master Cylinder, there that wasn't hard now was it?
Last edited by Sinister Z; Aug 24, 2006 at 11:20 AM.
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 13
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
I dont know about the rad cover, but the master cylinder cover can be bought through Billet Specialities. The master cylinder cover is not very cheap I think that I payed like $70 bucks , or something. there are cheaper ones out there, but from the ones that I have seen none have looked this good.
Good luck on your quest for shine
Good luck on your quest for shine
Senior Member
Joined: Jul 2003
Posts: 568
Likes: 2
From: Toronto, On.
Car: 1985 IROC-Z / Z-28
Engine: 383 C.I. Stroked 6.3 Litre
Transmission: 700R-4
Axle/Gears: 3:73 Posi
The one that's on my car is from a 68-70 Chevelle, I'm sure that you American folks can get it at Jeg's, Summit or Year One!
I found one at Jegs---> JEGS High Performance or here---> High Performance Parts & Accessories - Car Shop Inc. mine is the part # 9428
I found one at Jegs---> JEGS High Performance or here---> High Performance Parts & Accessories - Car Shop Inc. mine is the part # 9428
Last edited by Sinister Z; Aug 25, 2006 at 03:20 AM.
Trending Topics
Senior Member
Joined: Aug 2005
Posts: 852
Likes: 0
From: Springfield, Oregon
Car: 85 Z28, 88 GTA, 68 Cutlass S
Engine: 305TPI X2 ;), Chevy 250
Transmission: T5, 700R4, powerslide >:(
Axle/Gears: posi, and posi w/discs :D.
im pretty sure there is a guy on here that sells them. lemme check...
well, FSP sells the radiator cover for single fans...
well, FSP sells the radiator cover for single fans...
Senior Member
Joined: Oct 2004
Posts: 748
Likes: 0
From: Moreno Valley, CA
Car: 1990 Camaro RS
Engine: 305 TBI (L03)
Transmission: 700R4 (MD8)
Axle/Gears: 2.73 Open (GU2)
The one that's on my car is from a 68-70 Chevelle, I'm sure that you American folks can get it at Jeg's, Summit or Year One!
I found one at Jegs---> JEGS High Performance or here---> High Performance Parts & Accessories - Car Shop Inc. mine is the part # 9428
I found one at Jegs---> JEGS High Performance or here---> High Performance Parts & Accessories - Car Shop Inc. mine is the part # 9428

Senior Member
Joined: Jul 2003
Posts: 568
Likes: 2
From: Toronto, On.
Car: 1985 IROC-Z / Z-28
Engine: 383 C.I. Stroked 6.3 Litre
Transmission: 700R-4
Axle/Gears: 3:73 Posi
Thread Starter
Joined: Jul 2005
Posts: 638
Likes: 0
From: Toronto,Ontario
Car: 1989 IROC-Z
Engine: 346 LS6
Transmission: T56
Axle/Gears: Hybrid 8.8 3.73
I have dual fans and the TPI snorkal...... i wonder if that will present a problem or can i make it fit????
Speed
Speed
Member
Joined: Jun 2004
Posts: 295
Likes: 0
From: Michigan
Car: 1989 Formula
Engine: L98
Transmission: 700R4
Axle/Gears: 9 bolt GW6
I dont know about the rad cover, but the master cylinder cover can be bought through Billet Specialities. The master cylinder cover is not very cheap I think that I payed like $70 bucks , or something. there are cheaper ones out there, but from the ones that I have seen none have looked this good.
Good luck on your quest for shine
Good luck on your quest for shine

Billet Specialties - Master Cylinder Cover '88-'98
Senior Member
Joined: Jul 2003
Posts: 568
Likes: 2
From: Toronto, On.
Car: 1985 IROC-Z / Z-28
Engine: 383 C.I. Stroked 6.3 Litre
Transmission: 700R-4
Axle/Gears: 3:73 Posi
HMMMM...good question, I really don't know about that snorkal but I too have the dual fans, if it doesn't work then you could alway get the stocke one chromed!
Senior Member
Joined: Jul 2003
Posts: 568
Likes: 2
From: Toronto, On.
Car: 1985 IROC-Z / Z-28
Engine: 383 C.I. Stroked 6.3 Litre
Transmission: 700R-4
Axle/Gears: 3:73 Posi
Take a look over here---> 1985 Chevrolet Camaro - Nikko's Chevrolet "Rocinrol"
Joined: Jul 1999
Posts: 1,992
Likes: 10
From: CT
Car: 1986 Camaro SC
Engine: 305 TPI Procharged D1SC
Transmission: Tremec TKO-600
Axle/Gears: Moser 12 Bolt 3.73 posi
i would get one, but it will not work on stock dual or single electric fans, those fans mount to the radiator support cover.
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 13
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
- it been a while. Joined: May 2003
Posts: 712
Likes: 8
From: Elyria, Ohio
Car: 82 Z-28
Engine: Built 406ci
Transmission: 700R4 w/3000 stall
Axle/Gears: 3.73 Torsen Posi, Moser Axles
If you want to keep it inexpensive for the master cylinder cover, go to Mr Gasket Company for a plastic snap on cover that goes over your stock cover for less than 20.00 bucks, that's what I have..
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
Zachattack0925
Tech / General Engine
2
Aug 12, 2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
Aug 12, 2015 09:52 PM





I WANT 



