pics of monte carlos(i know u guys got some)
Thread Starter
Supreme Member
Joined: Dec 2000
Posts: 2,078
Likes: 0
From: United States
pics of monte carlos(i know u guys got some)
what does the 85' monte carlo look like. Need a pic please. NOt 86',87',88', or 89. Im looking for a pic of an 1985 monte carlo. 
------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"
Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.
------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"
Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.
Senior Member
Joined: Nov 2000
Posts: 931
Likes: 0
From: macomb Il
its a 1985 monte carlo SS. thats all i got right now. he hit a deer so it doesnt look like that in the front right now!!
------------------
Jarrad
1990 IROC-Z L98 350 TPI
TH-700R4
G92- 7.5" 10 Bolt 3.23gears
Bright Red Hardtop/ Grey Custom Interior
5,507 IROC's Hardtops/Ttops; 2,415 5.7L IROC's Produced in 1990
DAILY DRIVER: 1991 S10 2.5L/5SPD WITH CAMARO RIMS
Member
Joined: Jan 2001
Posts: 374
Likes: 0
From: University Park Pa
damn deer..
------------------
Hey feel free to chat with me on AOL IM if you wanna.. Darkhal2000! Also if you wanna join my webring gimmie a yell at my email addy. I'm always looking for third gen's to add.
My site, http://www.personal.psu.edu/users/j/m/jmj211/index.htm
------------------
Hey feel free to chat with me on AOL IM if you wanna.. Darkhal2000! Also if you wanna join my webring gimmie a yell at my email addy. I'm always looking for third gen's to add.
My site, http://www.personal.psu.edu/users/j/m/jmj211/index.htm
Thread Starter
Supreme Member
Joined: Dec 2000
Posts: 2,078
Likes: 0
From: United States
Damn it i want more pics While your at it how about some information about an 85' monte carlo ss or plain 
------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"
Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.
Member
Joined: Dec 2000
Posts: 379
Likes: 0
From: Yabba Grabba Brew
Car: 89 Camaro RS Convertible
Engine: 305
Transmission: NWC T-5
Here you want 85 Montes? Here, have your fill of these
------------------
1989 Camaro Convertible RS
dark silver w/black top
305tbi, auto, 2.73 posi
SLP exhaust, 16x8 black GTA rims as soon as I get them
Check out Phil's Rice Boy Page
------------------
1989 Camaro Convertible RS
dark silver w/black top
305tbi, auto, 2.73 posi
SLP exhaust, 16x8 black GTA rims as soon as I get them
Check out Phil's Rice Boy Page
<font face="Verdana, Arial" size="2">The size of a Honda Civic's exhaust tip is inversely proportional to the size of the drivers' peni$ </font>
Junior Member
Joined: Mar 2001
Posts: 6
Likes: 0
From: Davenport, IA
Rare-Roc you forgot to mention that he is getting the front end fixed. He ordered the parts last night. It should be all good in a week or two. Also, what's up with the Monte Carlo with the 91-92 Rs/Z28 16in. rims on it?? I've never seen that before.
------------------
1992 RS Camaro
Hawaiian Orchid(Purple)
305 TBI w/16 in. rims
------------------
1992 RS Camaro
Hawaiian Orchid(Purple)
305 TBI w/16 in. rims
Trending Topics
Thread Starter
Supreme Member
Joined: Dec 2000
Posts: 2,078
Likes: 0
From: United States
FUKen ahhhhhhhhh. The jerk off HICK. Sorry for the language but im pissed. I go out of my way,drove about 2 hours to get there and what do i see 
an 81' monte carlo and its not even an SS. Its one of those luxury grandma cars with pin metal rims(throwing uP)anyway price was good but what the hell do i want that for(no offense to monte owners)He said it was an 85' I guess he thought i was some moron who would just take it. Got to admit he had a freakin nice lawn full of muscle cars including a blue w/ black rally stripes Chevelle, 67' camaro, 68' roadrunner, 71' malibu all were restored completly and i almost got screwed. Damn it im pissed
------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"
Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.
an 81' monte carlo and its not even an SS. Its one of those luxury grandma cars with pin metal rims(throwing uP)anyway price was good but what the hell do i want that for(no offense to monte owners)He said it was an 85' I guess he thought i was some moron who would just take it. Got to admit he had a freakin nice lawn full of muscle cars including a blue w/ black rally stripes Chevelle, 67' camaro, 68' roadrunner, 71' malibu all were restored completly and i almost got screwed. Damn it im pissed ------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"
Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.
Thread
Thread Starter
Forum
Replies
Last Post
