just clayed and wash/waxed car
Thread Starter
Supreme Member
iTrader: (12)
Joined: Aug 2005
Posts: 1,923
Likes: 3
From: M.D
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
just clayed and wash/waxed car
just spent all day washing claying and wacing my car then went to take some pics. so here they are
Senior Member
Joined: Jun 2003
Posts: 749
Likes: 0
From: Acworth/Marietta, GA
Car: 88 IROC
Engine: 350 TPI
Transmission: Pro 5.0 shifted T56
Axle/Gears: 10 bolt 3.73 posi
Re: just clayed and wash/waxed car
nice! i friggin love the chrome c-5s!!!!! that is exactally what i want my iroc to look like. awesome car!!!!!
Trending Topics
TGO Supporter

Joined: Apr 2004
Posts: 4,224
Likes: 0
From: Massachusetts
Car: 91 Z28 & 21 Hellcat Challenger
Engine: L98, Hemi 6.2
Re: just clayed and wash/waxed car
get some direct sunlight shots. Looks pretty wet. What clay did you use? Did you just lubricate it with QD or did you wash the car and clayed/qd it at the same time? What wax you go with? Applied by hand or machine? You gotta love the clay, see all the black and crap sticking on to it and feel your paint like its glass. Becareful with clay though because it can leave marring esp on black if you dont lubricate both the clay and paint good enough. Also make sure you inspect your clay so you can roll it up and go over it with a good side.
Thread Starter
Supreme Member
iTrader: (12)
Joined: Aug 2005
Posts: 1,923
Likes: 3
From: M.D
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: just clayed and wash/waxed car
1. i used miguires med pro clay
2.i washed my car ,dryed it off then did pannle by pannle with the clay. i used this detail spray from some dealer deail shop. i used lots of the spary and kept everythign well lubed up.
3. i threw away about 1/3 of the clay bar cuz i dropped it.
4.i used black magic liquid wax
5.yeh my paint felt sooo clean
6.i did it by hand im just starting to look into buffers { any one wana put some imput in about em besides not to burn though my paint}
any other questions or comments just ask
2.i washed my car ,dryed it off then did pannle by pannle with the clay. i used this detail spray from some dealer deail shop. i used lots of the spary and kept everythign well lubed up.
3. i threw away about 1/3 of the clay bar cuz i dropped it.
4.i used black magic liquid wax
5.yeh my paint felt sooo clean
6.i did it by hand im just starting to look into buffers { any one wana put some imput in about em besides not to burn though my paint}
any other questions or comments just ask
TGO Supporter

Joined: Apr 2004
Posts: 4,224
Likes: 0
From: Massachusetts
Car: 91 Z28 & 21 Hellcat Challenger
Engine: L98, Hemi 6.2
Re: just clayed and wash/waxed car
1. i used miguires med pro clay
2.i washed my car ,dryed it off then did pannle by pannle with the clay. i used this detail spray from some dealer deail shop. i used lots of the spary and kept everythign well lubed up.
3. i threw away about 1/3 of the clay bar cuz i dropped it.
4.i used black magic liquid wax
5.yeh my paint felt sooo clean
6.i did it by hand im just starting to look into buffers { any one wana put some imput in about em besides not to burn though my paint}
any other questions or comments just ask
2.i washed my car ,dryed it off then did pannle by pannle with the clay. i used this detail spray from some dealer deail shop. i used lots of the spary and kept everythign well lubed up.
3. i threw away about 1/3 of the clay bar cuz i dropped it.
4.i used black magic liquid wax
5.yeh my paint felt sooo clean
6.i did it by hand im just starting to look into buffers { any one wana put some imput in about em besides not to burn though my paint}
any other questions or comments just ask
i would invest your money on a orbital PC with good set of pads (cutting/med cut/polishing and finishing pad) Great for swirl removal and paint defects. Plus its dummy proof unlike a rotary.
Thread Starter
Supreme Member
iTrader: (12)
Joined: Aug 2005
Posts: 1,923
Likes: 3
From: M.D
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: just clayed and wash/waxed car
where can i find this at ? and what is a good set of pads?
Supreme Member
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 1
From: Rockville, Maryland
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
Re: just clayed and wash/waxed car
damn your car needed that. looks way better.
TGO Supporter

Joined: Apr 2004
Posts: 4,224
Likes: 0
From: Massachusetts
Car: 91 Z28 & 21 Hellcat Challenger
Engine: L98, Hemi 6.2
Thread Starter
Supreme Member
iTrader: (12)
Joined: Aug 2005
Posts: 1,923
Likes: 3
From: M.D
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: just clayed and wash/waxed car
forgot about that link.
hey adam long time no talk, and yeh my car deffly needed that . gona try and keep it waxed and clean
hey adam long time no talk, and yeh my car deffly needed that . gona try and keep it waxed and clean
Supreme Member
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 1
From: Rockville, Maryland
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
Re: just clayed and wash/waxed car
nice. ill be home for summer in a couple weeks and well hit up some meets. by the way, i saw a hot chick on campus get into an 87 iroc just like yours today cept the letters were grey. i was like
Thread Starter
Supreme Member
iTrader: (12)
Joined: Aug 2005
Posts: 1,923
Likes: 3
From: M.D
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: just clayed and wash/waxed car
go for her! or give her my # lol ..im i pass your school like every friday on the way to the auction's in lancaster ,pa
Supreme Member
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 1
From: Rockville, Maryland
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
Re: just clayed and wash/waxed car
haha. dude visit sometime.
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
40
Aug 21, 2015 02:12 PM




